{"title":"BMR Suspension Chassis Braces \u0026 Reinforcements","description":null,"products":[{"product_id":"ford-mustang-chassis-braces-reinforcements-cb005","title":"Level 2 Cradle Bushing Lockout Kit \u003cbr\u003e 15-24 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eBuilt from 6061-T6 billet aluminum, stainless steel, and heavy-duty 1 5\/8-inch DOM steel tubing, BMR's CB005 Cradle Bushing Lockout Kit is designed to nearly eliminate cradle bushing deflection, which is one of the biggest causes of wheelhop. BMR's CB005s billet aluminum upper bushing lockout rings capture the inner bushing sleeve (front and rear) and the outer lip of the bushing cup on the cradle (front). The lower bushing locating washers (front) capture the bottom portion of the bushings inner sleeves. By capturing both parts of the bushings inner sleeves, movement on any plane (fore\/aft, lateral, and vertical) is nearly eliminated. This assembly is completed with bolt-on cradle braces that replace the factory sheer plates. The large lug on the cradle side of the braces positively locates the cradle, ensuring it is perfectly centered under the car. The two bolts in the frame ensure the location of the cradle can't change under any form of driving.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2023 S550 Mustangs\n\u003c\/li\u003e\u003cli\u003eFits 2024-Current S650 Mustangs\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eInstalls with simple hand tools\n\u003c\/li\u003e\u003cli\u003eCNC-machined 6061-T6 billet aluminum upper bushing lockout rings\n\u003c\/li\u003e\u003cli\u003eLaser-cut lower bushing support washers\n\u003c\/li\u003e\u003cli\u003eCNC-formed stainless steel lower bushing support plates\n\u003c\/li\u003e\u003cli\u003e1 5\/8-inch DOM steel tubing cradle braces\n\u003c\/li\u003e\u003cli\u003eCenters the rear cradle\n\u003c\/li\u003e\u003cli\u003eGreatly reduces stock bushing deflection, wheel hop, and cradle deflection\n\u003c\/li\u003e\u003cli\u003eUses factory bolt holes and hardware\n\u003c\/li\u003e\u003cli\u003eAdds a solid rear jacking point to each side\n\u003c\/li\u003e\u003cli\u003eDurable powder coat finish\n\u003c\/li\u003e\u003cli\u003eAvailable in black hammertone and red powder coat\n\u003c\/li\u003e\u003cli\u003e1-2 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eCradle Bushing Kit\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2015-2024 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109428552043,"sku":"BMR-CB005R","price":199.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109428584811,"sku":"BMR-CB005H","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CB005R-1.jpg?v=1776328593"},{"product_id":"ford-mustang-chassis-braces-reinforcements-cb006","title":"4-Point Front Subframe Chassis Brace \u003cbr\u003e 15-24 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease steering stability, K-member rigidity, and reduce front alignment changes on your S550 and S650 Mustang with a front Chassis Brace from BMR's suspension. The factory K-member and lower control arm mount can deflect under hard braking and extreme lateral loading. Built from a mixture of heavy-duty 2 1\/4-inch DOM steel and 1- by 1.5-inch rectangular tubing, BMR's CB006 Chassis Brace is designed to support and stiffen the factory S550 K-member and front suspension. This increases steering feel and stability during aggressive braking and maneuvering. BMR's CB006's front Chassis Brace ties the front lower control mounts to the rear legs of the K-member. The design reinforces every major area of the K-member effectively reducing deflection when fore, aft, and lateral loads are applied to the chassis. BMR's suspension designed the CB006 front Chassis Brace for street performance, drag race, and handling application. This 100% bolt-on kit use existing boltholes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the Chassis Brace minimizes lower control arm mounts and K-member deflection with no change in NVH. This brace reduces deflection, increasing steering feel and stability on both the street and track. This brace is designed to fit with both stock and aftermarket headers and exhaust systems. BMR's suspensions CB006 front Chassis Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.! NOTE: The Brace does not fit V6 or GT350 models. It also does not fit 2015+ Mustang V8 applications with Kooks Long Tube Headers.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2023 S550 Mustangs\n\u003c\/li\u003e\u003cli\u003eFits 2024-Current S650 Mustangs\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eInstalls with simple hand tools\n\u003c\/li\u003e\u003cli\u003eManufactured from DOM and square steel tubing\n\u003c\/li\u003e\u003cli\u003eCNC-machined billet aluminum spacers\n\u003c\/li\u003e\u003cli\u003eReinforces front lower control arm mounts\n\u003c\/li\u003e\u003cli\u003eGreatly reduces k-member deflection\n\u003c\/li\u003e\u003cli\u003eUses factory bolt holes and hardware\n\u003c\/li\u003e\u003cli\u003eWorks with stock and aftermarket headers and exhaust systems (Does not fit with Kooks Long Tube Headers and Moroso Road Race Oil Pan)\n\u003c\/li\u003e\u003cli\u003eNo change in NVH\n\u003c\/li\u003e\u003cli\u003eDurable powder coat finish\n\u003c\/li\u003e\u003cli\u003eAvailable in red and black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e1 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFront Chassis Brace\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2015-2024 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109428650347,"sku":"BMR-CB006R","price":239.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109428683115,"sku":"BMR-CB006H","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CB006R-1.jpg?v=1776328599"},{"product_id":"ford-mustang-chassis-braces-reinforcements-cb007","title":"Front 2-Point Subframe Chassis Brace \u003cbr\u003e 15-24 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease steering stability and K-member rigidity on your S550 and S650 Mustang with a front Chassis Brace from BMR's suspension. The factory K-member legs can deflect under hard braking and extreme lateral loading. Built from heavy-duty 1- by 1.5-inch rectangular tubing and CNC-formed, laser-cut 3\/16-inch steel plate, BMR's CB007 Chassis Brace is designed to support and stiffen the factory S550 K-member. This increases steering feel and stability during aggressive braking and maneuvering. BMR's CB007's front Chassis Brace ties the rear legs of the K-member together, reinforcing this major area of the K-member. This effectively reduces deflection when fore, aft, and lateral loads are applied to the chassis. BMR's suspension designed the CB007 front Chassis Brace for street performance, drag race, and handling application. This 100% bolt-on kit use existing boltholes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the Chassis Brace minimizes K-member deflection with no change in NVH. This brace reduces deflection, increasing steering feel and stability on both the street and track. This brace is designed to fit with both stock and aftermarket headers and exhaust systems. BMR's suspensions CB007 front Chassis Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is less than 1 hour. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2023 S550 Mustangs\n\u003c\/li\u003e\u003cli\u003eFits 2024-Current S650 Mustangs\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eInstalls with simple hand tools\n\u003c\/li\u003e\u003cli\u003eManufactured from DOM and square steel tubing\n\u003c\/li\u003e\u003cli\u003eCNC-machined billet aluminum spacers\n\u003c\/li\u003e\u003cli\u003eReinforces front lower control arm mounts\n\u003c\/li\u003e\u003cli\u003eGreatly reduces k-member deflection\n\u003c\/li\u003e\u003cli\u003eUses factory bolt holes and hardware\n\u003c\/li\u003e\u003cli\u003eWorks with stock and aftermarket headers and exhaust systems (Does not work with Kooks Long Tube Headers and Moroso Road Race Oil Pan)\n\u003c\/li\u003e\u003cli\u003eNo change in NVH\n\u003c\/li\u003e\u003cli\u003eDurable powder coat finish\n\u003c\/li\u003e\u003cli\u003e Available in red and black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFront Chassis Brace\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2015-2024 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109428781419,"sku":"BMR-CB007R","price":129.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109428814187,"sku":"BMR-CB007H","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CB007R-1.jpg?v=1776328605"},{"product_id":"chevrolet-camaro-chassis-braces-reinforcements-cb008","title":"Front Of Rear Cradle Chassis Brace \u003cbr\u003e 16-20 Chevrolet Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce Wheelhop and cradle movement and deflection on your 2016-newer Chevrolet Camaro with Cradle Braces from BMR's suspension. Built from heavy-duty, 1 1\/2-inch DOM steel tubing, BMR's CB008 Cradle Braces is designed to greatly reduce cradle deflection, which is one of the biggest causes of wheelhop. BMR's CB008 attaches to the front section of the cradle and frame to strengthen the entire assembly. The brace captures the bottom side of the cradle mounts, making each front mount double sheer. This mounting style adds strength and reduces deflection. The brace also mounts to the frame, eliminating any cradle deflection caused by the factory single sheer mounts. BMR's suspension designed the CB008 Cradle Braces for any application. This 100% bolt-on kit use existing bolt-holes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Braces greatly reduces cradle deflection. BMR's suspensions CB008 rear Cradle Braces is an easy and affordable way to effectively lessen wheelhop and cradle movement on your Sixth Gen Camaro. BMR's suspensions CB008 Cradle Braces is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eInstalls with simple hand tools\n\u003c\/li\u003e\u003cli\u003e1 1\/2-inch DOM steel tubing \n\u003c\/li\u003e\u003cli\u003eGreatly reduces stock cradle deflection \n\u003c\/li\u003e\u003cli\u003eUsed factory bolt holes and supplied hardware\n\u003c\/li\u003e\u003cli\u003eDurable powdercoat finish\n\u003c\/li\u003e\u003cli\u003eAvailable in black hammertone and red powdercoat\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly built in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eRear Cradle Brace\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2016-2020 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109428879723,"sku":"BMR-CB008R","price":149.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109428912491,"sku":"BMR-CB008H","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CB008R-1.jpg?v=1776328610"},{"product_id":"chevrolet-camaro-chassis-braces-reinforcements-cb009","title":"Rear Of Rear Cradle Chassis Brace \u003cbr\u003e 16-24 Chevrolet Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce Wheelhop and cradle movement and deflection on your 2016-newer Chevrolet Camaro with a rear Cradle Brace from BMR's suspension. Built from heavy-duty, yet lightweight 1 1\/4-inch Chrome-moly tubing, BMR's CB009 rear Cradle Brace is designed to greatly reduce cradle deflection, which is one of the biggest causes of wheelhop. BMR's CB009 attaches to the rear section of the cradle and frame to strengthen the entire assembly. The brace captures the bottom side of the cradle mounts, making each rear mount double sheer. This mounting style adds strength and reduces deflection. The brace also mounts to the frame, eliminating any cradle deflection caused by the factory single sheer mounts.BMR's suspension designed the CB009 rear Cradle Brace for any application. This lightweight 100% bolt-on kit use existing boltholes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Brace greatly reduces cradle deflection. BMR's suspensions CB009 rear Cradle Brace is lightweight and affordable way to effectively lessen wheelhop and cradle movement on your Sixth Gen Camaro.NOTE: This part is not compatible with convertibles, ZL1 or other models equipped with Electronic differentialBMR's suspensions CB009 rear Cradle Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eInstalls with simple hand tools\n\u003c\/li\u003e\u003cli\u003e1 1\/4-inch Chrome-moly tubing\n\u003c\/li\u003e\u003cli\u003eGreatly reduces stock cradle deflection \n\u003c\/li\u003e\u003cli\u003eUsed factory bolt holes and supplied hardware\n\u003c\/li\u003e\u003cli\u003eDurable powdercoat finish\n\u003c\/li\u003e\u003cli\u003eAvailable in black hammertone and red powdercoat\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly built in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eRear Cradle Brace\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2016-2024 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109428978027,"sku":"BMR-CB009R","price":229.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109429010795,"sku":"BMR-CB009H","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CB009R-1.jpg?v=1776328616"},{"product_id":"chevelle-cutlass-skylark-chassis-braces-reinforcements-cb400","title":"Front Reinforcement Chassis Brace \u003cbr\u003e 64-67 Chevelle \/ Cutlass \/ Skylark (GM A-Body)","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease steering stability and reduce chassis deflection on your 1964-1967 A-Body with a Front Chassis Brace from BMR's suspension! The front frame and suspension of your A-Body can flex under hard braking and lateral loading. BMRs Front Chassis Brace (CB400) stiffens the chassis of your A-Body and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR's suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1964-1967 GM A-Bodies\n\u003c\/li\u003e\u003cli\u003eManufactured from 1.25-inch DOM steel tubing and heavy-duty steel plate\n\u003c\/li\u003e\u003cli\u003eIncludes Grade 8 hardware\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eDramatically increases front chassis stiffness\n\u003c\/li\u003e\u003cli\u003eAdds rigidity to the front suspension\n\u003c\/li\u003e\u003cli\u003eImproves handling and performance\n\u003c\/li\u003e\u003cli\u003eReduces unwanted vibration and noise\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e1 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFront Chassis Brace\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1965-1967 Buick Gran Sport\n\u003c\/li\u003e\u003cli\u003e1964-1967 Oldsmobile Cutlass 442\n\u003c\/li\u003e\u003cli\u003e1964-1967 Pontiac LeMans GTO\n\u003c\/li\u003e\u003cli\u003e1964-1967 Buick Skylark\n\u003c\/li\u003e\u003cli\u003e1967 Chevrolet Chevelle\n\u003c\/li\u003e\u003cli\u003e1964-1967 Chevrolet El Camino\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109429109099,"sku":"BMR-CB400R","price":219.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109429141867,"sku":"BMR-CB400H","price":219.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CB400R-1.jpg?v=1776328624"},{"product_id":"gm-a-body-monte-carlo-chassis-braces-reinforcements-cb410","title":"Front Reinforcement Chassis Brace \u003cbr\u003e 68-72 GM A-Body, 70-72 Monte Carlo","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease steering stability and reduce chassis deflection on your 1968-1972 A-Body with a Front Chassis Brace from BMR's suspension! The front frame and suspension of your A-Body can flex under hard braking and lateral loading. BMRs Front Chassis Brace (CB410) stiffens the chassis of your A-Body and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR's suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1968-1972 GM A-Bodies\n\u003c\/li\u003e\u003cli\u003eManufactured from 1.25-inch DOM steel tubing and heavy-duty steel plate\n\u003c\/li\u003e\u003cli\u003eIncludes Grade 8 hardware\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eDramatically increases front chassis stiffness\n\u003c\/li\u003e\u003cli\u003eAdds rigidity to the front suspension\n\u003c\/li\u003e\u003cli\u003eImproves handling and performance\n\u003c\/li\u003e\u003cli\u003eReduces unwanted vibration and noise\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e1 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eChassis Brace\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1968-1972 Chevrolet Chevelle El Camino\n\u003c\/li\u003e\u003cli\u003e1968-1972 Buick Skylark\n\u003c\/li\u003e\u003cli\u003e1968-1972 Pontiac LeMans GTO\n\u003c\/li\u003e\u003cli\u003e1968-1972 Oldsmobile Cutlass\n\u003c\/li\u003e\u003cli\u003e1968-1971 Oldsmobile 442\n\u003c\/li\u003e\u003cli\u003e1970-1972 Chevrolet Monte Carlo\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109429207403,"sku":"BMR-CB410R","price":229.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109429240171,"sku":"BMR-CB410H","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CB410R-1.jpg?v=1776328630"},{"product_id":"buick-regal-chevy-malibu-oldsmobile-cutlass-chassis-braces-reinforcements-cb460","title":"Front Reinforcement Chassis Brace \u003cbr\u003e 78-87 Buick Regal Chevy Malibu Oldsmobile Cutlass","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease steering stability and reduce chassis deflection on your 1978-1987 G-Body with a Front Chassis Brace from BMR's suspension! The front frame and suspension of your G-Body can flex under hard braking and lateral loading. BMRs Front Chassis Brace (CB460) stiffens the chassis of your G-Body and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR's suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1978-1987 GM G-Bodies\n\u003c\/li\u003e\u003cli\u003eManufactured from 1.25-inch DOM steel tubing and heavy-duty steel plate\n\u003c\/li\u003e\u003cli\u003eIncludes Grade 8 hardware\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eDramatically increases front chassis stiffness\n\u003c\/li\u003e\u003cli\u003eAdds rigidity to the front suspension\n\u003c\/li\u003e\u003cli\u003eImproves handling and performance\n\u003c\/li\u003e\u003cli\u003eReduces unwanted vibration and noise\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e1 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003e Proudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eChassis Brace\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1978-1987 Buick Regal\n\u003c\/li\u003e\u003cli\u003e1978-1983 Chevrolet Malibu\n\u003c\/li\u003e\u003cli\u003e1978-1981,1985-1987 Oldsmobile Cutlass\n\u003c\/li\u003e\u003cli\u003e1978-1987 Pontiac Grand Prix\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109429272939,"sku":"BMR-CB460R","price":239.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109429305707,"sku":"BMR-CB460H","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CB460R-1.jpg?v=1776328636"},{"product_id":"ford-mustang-chassis-braces-reinforcements-cb762","title":"IRS Subframe Support Brace \u003cbr\u003e 15-24 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eLockout your rear IRS subframe on your S550 and S650 Mustang with an IRS Subframe Support Brace System from BMR's suspension! The subframe of your Mustang can deflect under hard acceleration, causing slower and inconsistent launches. BMRs IRS Subframe Support Brace System (CB762) improves the performance of your vehicle and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR's suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2023 S550 Mustangs\n\u003c\/li\u003e\u003cli\u003eFits 2024-Current S650 Mustangs\n\u003c\/li\u003e\u003cli\u003eManufactured from 0.1875-inch heavy-duty sheet metal\n\u003c\/li\u003e\u003cli\u003eMIG-welded construction\n\u003c\/li\u003e\u003cli\u003eGrade 10.9 hardware\n\u003c\/li\u003e\u003cli\u003ePrevents deflection under heavy acceleration\n\u003c\/li\u003e\u003cli\u003eHelps center and lockout the rear IRS subframe\n\u003c\/li\u003e\u003cli\u003eReinforces weak points\n\u003c\/li\u003e\u003cli\u003eBolt-on design\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e3-4 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eIRS Subframe Brace\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2015-2024 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109429338475,"sku":"BMR-CB762R","price":239.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109429371243,"sku":"BMR-CB762H","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CB762R-1.jpg?v=1776328643"},{"product_id":"ford-mustang-chassis-braces-reinforcements-cb770","title":"Front 4-Point Subframe Chassis Brace \u003cbr\u003e 2024 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eGreatly increase K-member rigidity and steering stability on your S650 Mustang with a Front Chassis Brace from BMR's suspension! Factory K-members and lower control arm mounts can deflect under hard braking and extreme lateral loading. BMRs Front Chassis Brace (CB770) stiffens the factory K-member and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR's suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2024-Current S650 Mustangs\n\u003c\/li\u003e\u003cli\u003eManufactured from heavy-duty DOM steel tubing\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eSupports and stiffens the factory K-member\n\u003c\/li\u003e\u003cli\u003eReinforces front lower control arm mounts\n\u003c\/li\u003e\u003cli\u003eGreatly reduces K-member deflection\n\u003c\/li\u003e\u003cli\u003eIncreases steering feel and stability\n\u003c\/li\u003e\u003cli\u003eMinimizes changes in NVH\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e1-2 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eSubfr Chassis Brace\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109429567851,"sku":"BMR-CB770R","price":209.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109429600619,"sku":"BMR-CB770H","price":209.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CB770R-1.jpg?v=1776328655"},{"product_id":"ford-mustang-chassis-braces-reinforcements-cb771","title":"Front 2-Point Subframe Chassis Brace \u003cbr\u003e 2024 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease steering stability and K-member rigidity on your S650 Mustang with a Front Chassis Brace from BMR's suspension! Factory K-members can deflect under hard braking and extreme lateral loading. BMRs Front Chassis Brace (CB771) stiffens the factory K-member and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR's suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2024-Current S650 Mustangs\n\u003c\/li\u003e\u003cli\u003eManufactured from 1.25-inch DOM steel tubing\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eSupports and stiffens the factory K-member\n\u003c\/li\u003e\u003cli\u003eReduces K-member deflection\n\u003c\/li\u003e\u003cli\u003eIncreases steering feel and stability\n\u003c\/li\u003e\u003cli\u003eMinimizes changes in NVH\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e1 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eSubfr Chassis Brace\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109429666155,"sku":"BMR-CB771R","price":99.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109429698923,"sku":"BMR-CB771H","price":99.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CB771R-1.jpg?v=1776328662"},{"product_id":"ford-mustang-chassis-braces-reinforcements-cjr002","title":"Super Low Profile Chassis Jacking Rails \u003cbr\u003e 15-23 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eAdd lift points and extra rigidity to your 2015-2023 S550 Mustang and 2024 S650 Mustang with bolt on Chassis Jacking Rails from BMR's suspension! Jacking your Mustang on its pinch welds can easily damage the pinch welds and floor pans, eventually causing panel misalignment. BMRs Super Low Profile Jacking Rails (CJR002) are designed to give you a solid jack point on your Mustang and are designed for any application. When performance is a must, rely on BMR's suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2023 S550 Mustangs\n\u003c\/li\u003e\u003cli\u003eManufactured from heavy-duty 1x2-inch boxed tubing\n\u003c\/li\u003e\u003cli\u003eProvides a solid jacking point for your Mustang\n\u003c\/li\u003e\u003cli\u003eSuper low profile design provides more room to get jacks under the car\n\u003c\/li\u003e\u003cli\u003e100% bolt-on\n\u003c\/li\u003e\u003cli\u003ePrevents damage from jacking up vehicle\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e 1 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003e Proudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eChassis Jacking Rail\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2015-2023 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109429993835,"sku":"BMR-CJR002R","price":169.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109430026603,"sku":"BMR-CJR002H","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CJR002R-1.jpg?v=1776328813"},{"product_id":"ford-mustang-chassis-braces-reinforcements-cjr760","title":"Chassis Jacking Rails \u003cbr\u003e 15-24 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eAdd strong lift points and extra rigidity to your S650 Mustang with bolt-on Chassis Jacking Rails from BMR's suspension! Jacking your Mustang on its pinch welds can easily damage the pinch welds and floor pans, eventually causing panel misalignment. BMRs Low Profile Chassis Jacking Rails (CJR760) are designed to give maximum clearance when jacking your S650 and are a more lightweight alternative to CJR002. When performance is a must, rely on BMR's suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2023 S550 Mustangs\n\u003c\/li\u003e\u003cli\u003eFits 2024-Current S650 Mustangs\n\u003c\/li\u003e\u003cli\u003eManufactured from heavy-duty 1x2-inch boxed tubing\n\u003c\/li\u003e\u003cli\u003eProvides a solid jacking point for your Mustang\n\u003c\/li\u003e\u003cli\u003eLighter, but sturdy, alternative to BMR's Super Low Profile Jacking Rails (CJR002)\n\u003c\/li\u003e\u003cli\u003e100% bolt-on\n\u003c\/li\u003e\u003cli\u003ePrevents damage from jacking up vehicle\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e1 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eChassis Jacking Rail\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2015-2024 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109430092139,"sku":"BMR-CJR760R","price":129.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109430124907,"sku":"BMR-CJR760H","price":129.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CJR760R-1.jpg?v=1776328819"},{"product_id":"ford-mustang-chassis-braces-reinforcements-cjr771","title":"Chassis Jacking Rails \u003cbr\u003e 2024 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eAdd lift points and extra rigidity to your S650 Mustang with bolt-on Chassis Jacking Rails from BMR's suspension! Jacking your Mustang on its pinch welds can easily damage the pinch welds and floor pans, eventually causing panel misalignment. BMRs Super Low Profile Jacking Rails (CJR771) provide a solid jack point on your Mustang and are designed for any application. When performance is a must, rely on BMR's suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2024-Current S650 Mustangs\n\u003c\/li\u003e\u003cli\u003eManufactured from heavy-duty 1x2-inch box steel tubing\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eProvides a solid jacking point for your Mustang on both sides\n\u003c\/li\u003e\u003cli\u003eSuper-low profile design provides more room to get jacks under the car\n\u003c\/li\u003e\u003cli\u003ePrevents damage when jacking up vehicle\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e1 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eChassis Jacking Rail\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109430157675,"sku":"BMR-CJR771R","price":189.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109430190443,"sku":"BMR-CJR771H","price":189.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-CJR771R-1.jpg?v=1776328825"},{"product_id":"ford-mustang-chassis-braces-reinforcements-dsl011","title":"Rear Tunnel Brace W\/Rear Driveshaft Safety Loop \u003cbr\u003e 05-14 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eProtect your 2005-2014 Mustang and 2007-2012 Ford Shelby GT500, while complying with NHRA safety rules with a rear Driveshaft Safety Loop from BMR's suspension. If you drag race your S197 Mustang, chances are you need a driveshaft safety loop to be NHRA legal. Built from 1\/4-inch laser-cut CNC-formed plate steel, BMRs DSL011 Driveshaft Safety Loop bolts-on using OE mounting holes from the factory floor pan. This design gives you a solidly mounted loop that will stay in place should a driveshaft or transmission failure occur.BMR's suspension designed the rear Driveshaft Safety Loop to contain a driveshaft, keeping it from ripping through the floor or digging into the track in event of a failure. It simply attaches to the factory floor pan with supplied Grade 8 hardware. Other companies driveshaft loops attach to the transmission and can fail to contain the driveshaft in the event of a transmission failure. BMR designed the DSL011 for street, drag race, and top speed applications. A rear Driveshaft Safety Loop is cheap insurance to protect your investment and provide peace-of-mind whether you are at the track or on the street. When performance is a must, rely on BMR's suspension!BMR does not recommend the DSL011 or the DTB002 with one-piece driveshafts. If those parts are used with a one-piece driveshaft, care must be taken when suspension droops. When lifting car, the rear jacking point should be the rear axle assembly.BMR's suspensions DSL011 bolt-on Driveshaft Safety Loop is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2005-2014 V6\/V8 Ford Mustang and 2007-2012 Ford Shelby GT500\n\u003c\/li\u003e\u003cli\u003eRear Driveshaft Loop\n\u003c\/li\u003e\u003cli\u003eBolt-on design\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eComplies with NHRA rules\n\u003c\/li\u003e\u003cli\u003eRequired for cars quicker than 13.99 in the quarter mile with sticky tires\n\u003c\/li\u003e\u003cli\u003eRequired for cars quicker than 11.49 in the quarter mile with stock tires\n\u003c\/li\u003e\u003cli\u003e1\/4-inch laser-cut plate steel\n\u003c\/li\u003e\u003cli\u003eIncludes all necessary Grade 8 hardware\n\u003c\/li\u003e\u003cli\u003eAvailable in black hammertone and red powdercoat\n\u003c\/li\u003e\u003cli\u003eDurable powdercoat finish\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly built in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eSafety Loop\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2005-2014 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109431173483,"sku":"BMR-DSL011R","price":149.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109431206251,"sku":"BMR-DSL011H","price":149.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-DSL011R-1.jpg?v=1776328881"},{"product_id":"ford-mustang-chassis-braces-reinforcements-dsl012","title":"Rear Tunnel Brace Loop Upgrade \u003cbr\u003e 05-14 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eProtect your 2005-2014 Mustang and 2007-2012 Ford Shelby GT500, while complying with NHRA safety rules with a rear Driveshaft Safety Loop from BMR's suspension. If you drag race your S197 Mustang, chances are you need a driveshaft safety loop to be NHRA legal. Built from 1\/4-inch laser-cut CNC-formed plate steel, BMRs DSL012 Driveshaft Safety Loop bolts-on using OE mounting holes on the DTB002. This design gives you a solidly mounted loop that will stay in place should a driveshaft or transmission failure occur.BMR's suspension designed the rear Driveshaft Safety Loop to contain a driveshaft, keeping it from ripping through the floor or digging into the track in event of a failure. It simply attaches to the factory floor pan with supplied Grade 8 hardware. Other companies driveshaft loops attach to the transmission and can fail to contain the driveshaft in the event of a transmission failure. BMR designed the DSL012 for street, drag race, and top speed applications. A rear Driveshaft Safety Loop is cheap insurance to protect your investment and provide peace-of-mind whether you are at the track or on the street. When performance is a must, rely on BMR's suspension!BMR's suspensions DSL012 bolt-on Driveshaft Safety Loop is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2005-2014 V6\/V8 Ford Mustang and 2007-2012 Ford Shelby GT500\n\u003c\/li\u003e\u003cli\u003eDriveshaft Loop for DTB002\n\u003c\/li\u003e\u003cli\u003eBolt-on design\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eComplies with NHRA rules\n\u003c\/li\u003e\u003cli\u003eRequired for cars quicker than 13.99 in the quarter mile with sticky tires\n\u003c\/li\u003e\u003cli\u003eRequired for cars quicker than 11.49 in the quarter mile with stock tires\n\u003c\/li\u003e\u003cli\u003e1\/4-inch laser-cut plate steel\n\u003c\/li\u003e\u003cli\u003eIncludes all necessary Grade 8 hardware\n\u003c\/li\u003e\u003cli\u003eAvailable in black hammertone and red powdercoat\n\u003c\/li\u003e\u003cli\u003eDurable powdercoat finish\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly built in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eSafety Loop\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2005-2014 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109431271787,"sku":"BMR-DSL012R","price":64.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109431304555,"sku":"BMR-DSL012H","price":64.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-DSL012R-1.jpg?v=1776328887"},{"product_id":"pontiac-g8-chevy-camaro-ss-chassis-braces-reinforcements-dtb004","title":"Driveshaft Tunnel Brace \u003cbr\u003e 08-09 Pontiac G8, 10-17 Chevy Camaro SS","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease floor and driveshaft tunnel rigidity on your 2010-2015 Chevy Camaro or Pontiac G8 with a Driveshaft Tunnel Brace from BMR's suspension. Built from 1x2-inch rectangular steel tubing and CNC laser-cut 3\/16-inch steel plate, BMR's DTB004 Driveshaft Tunnel Brace is designed to support and stiffen the factory floor and tunnel brace. This increases chassis rigidity increasing the overall feel during aggressive maneuvering. BMR's DTB004's Driveshaft Tunnel Brace strengthens the floor and driveshaft tunnel for increased chassis stiffness. The design reinforces key points of the floor, effectively reducing deflection when lateral loads are applied to the chassis. BMR's suspension designed the DTB004 Driveshaft Tunnel Brace for any application. This 100% bolt-on brace uses existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Driveshaft Tunnel Brace reduces floor and driveshaft tunnel deflection with no change in NVH. This increases steering feel and stability on both the street and track. BMR's suspensions DTB004 Driveshaft Tunnel Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is less than1 hour. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eInstalls with simple hand tools\n\u003c\/li\u003e\u003cli\u003eManufactured from 1x2-inch rectangular steel tubing and CNC-laser cut 3\/16-inch steel\n\u003c\/li\u003e\u003cli\u003eReinforces the floor and driveshaft tunnel\n\u003c\/li\u003e\u003cli\u003eUsed factory bolt holes and hardware\n\u003c\/li\u003e\u003cli\u003eWorks with stock and aftermarket headers and exhaust systems\n\u003c\/li\u003e\u003cli\u003eNo change in NVH\n\u003c\/li\u003e\u003cli\u003eDurable powdercoat finish\n\u003c\/li\u003e\u003cli\u003eAvailable in black hammertone and red powdercoat\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly built in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eTunnel Brace\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2008-2009 Pontiac G8\n\u003c\/li\u003e\u003cli\u003e2010-2015 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e2014-2017 Chevrolet SS\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109433762155,"sku":"BMR-DTB004R","price":79.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109433794923,"sku":"BMR-DTB004H","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-DTB004R-1.jpg?v=1776328943"},{"product_id":"cadillac-cts-chevy-camaro-chassis-braces-reinforcements-dtb005","title":"Steel Driveshaft Tunnel Brace \u003cbr\u003e 15-19 Cadillac CTS, 16-24 Chevy Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease floor and driveshaft tunnel rigidity on your 6th Gen Camaro and 3rd Gen CTS-V with a Driveshaft Tunnel Brace from BMR's suspension! The floor of your vehicle can deflect during aggressive maneuvering, decreasing performance. BMRs Steel Driveshaft Tunnel Brace (DTB005) reinforces key points in the floor of your vehicle to reduce deflection and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR's suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2019 Cadillac CTS-Vs\n\u003c\/li\u003e\u003cli\u003eFits 2016-2024 Chevy Camaros\n\u003c\/li\u003e\u003cli\u003eManufactured from heavy-duty 3\/16-inch steel plate\n\u003c\/li\u003e\u003cli\u003eReinforces the floor and driveshaft tunnel of your vehicle\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eReduces deflection when lateral loads are applied to the chassis\n\u003c\/li\u003e\u003cli\u003eIncreases steering feel and stability\n\u003c\/li\u003e\u003cli\u003eMinimizes changes in NVH\n\u003c\/li\u003e\u003cli\u003eCompatible with stock and aftermarket headers and exhaust systems\n\u003c\/li\u003e\u003cli\u003eWeighs only 2.7 pounds for a lightweight design\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003eLess than 1 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eTunnel Brace\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2015-2019 Cadillac CTS\n\u003c\/li\u003e\u003cli\u003e2016-2024 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109434286443,"sku":"BMR-DTB005R","price":89.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109434319211,"sku":"BMR-DTB005H","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-DTB005R-1.jpg?v=1776328949"},{"product_id":"cadillac-cts-chevy-camaro-chassis-braces-reinforcements-dtb006","title":"Aluminum Driveshaft Tunnel Brace \u003cbr\u003e 15-19 Cadillac CTS, 16-24 Chevy Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease floor and driveshaft tunnel rigidity on your 6th Gen Camaro and 3rd Gen CTS-V with a Driveshaft Tunnel Brace from BMR's suspension! The floor of your vehicle can deflect during aggressive maneuvering, decreasing performance. BMRs Aluminum Driveshaft Tunnel Brace (DTB006) reinforces key points in the floor of your vehicle to reduce deflection and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR's suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2019 Cadillac CTS-Vs\n\u003c\/li\u003e\u003cli\u003eFits 2016-2024 Chevy Camaros\n\u003c\/li\u003e\u003cli\u003eManufactured from heavy-duty 0.25-inch aluminum plate\n\u003c\/li\u003e\u003cli\u003eReinforces the floor and driveshaft tunnel of your vehicle\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eReduces deflection when lateral loads are applied to the chassis\n\u003c\/li\u003e\u003cli\u003eIncreases steering feel and stability\n\u003c\/li\u003e\u003cli\u003eMinimizes changes in NVH\n\u003c\/li\u003e\u003cli\u003eCompatible with stock and aftermarket headers and exhaust systems\n\u003c\/li\u003e\u003cli\u003eWeighs only 1.4 pounds for a lightweight design\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003eLess than 1 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eTunnel Brace\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2015-2019 Cadillac CTS\n\u003c\/li\u003e\u003cli\u003e2016-2024 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109434679659,"sku":"BMR-DTB006R","price":109.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109434712427,"sku":"BMR-DTB006H","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-DTB006R-1.jpg?v=1776328955"},{"product_id":"ford-mustang-chassis-braces-reinforcements-sfc024","title":"Weld-On Boxed STD. Subframe Connectors \u003cbr\u003e 98-04 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase the handling capabilities of your 1979-2004 Mustang with tubular, weld-on subframe connectors from BMR's suspension. The Fox chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR's subframe connectors are manufactured from heavy-duty 1 5\/8-inch steel tubing with laser-cut CNC-formed 3\/16-inch steel plates. This adds loads of strength in all the right places. These weld-on subframe connectors are engineered to considerably strengthen the chassis and reinforce the rear suspension. The SFC024s connect the front subframe and rear subframe, linking the front and rear of the chassis together.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1979-2004 Mustang\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling \n\u003c\/li\u003e\u003cli\u003eManufactured from 1 5\/8-inch steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16-inch laser-cut, CNC-formed steel plate\n\u003c\/li\u003e\u003cli\u003eWeld-in design\n\u003c\/li\u003e\u003cli\u003eTwo attachment points for superior chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eReduces vehicle squeaks and rattles\n\u003c\/li\u003e\u003cli\u003eCompact design, no ground clearance issues\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eSubframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1998-2004 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109464105323,"sku":"BMR-SFC024R","price":239.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109464138091,"sku":"BMR-SFC024H","price":239.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-SFC024R-1.jpg?v=1776329712"},{"product_id":"pontiac-firebird-chevy-camaro-chassis-braces-reinforcements-sfc321","title":"Bolt-On Subframe Connector \u003cbr\u003e 74-81 Pontiac Firebird, Chevy Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling on your 1974-1981 F-Body with a Bolt-On Subframe Connector Kit from BMR's suspension! In performance scenarios, the F-Body chassis can flex dramatically, even with mild amounts of torque and horsepower. BMRs Bolt-On Subframe Connector (SFC321) is considerably stronger than other subframe connectors on the market, allowing for a stiffer chassis in street performance, drag racing, and handling applications. When performance is a must, rely on BMR's suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1974-1981 GM F-Bodies\n\u003c\/li\u003e\u003cli\u003eManufactured from 2x2-inch, 0.120-inch wall square steel tubing\n\u003c\/li\u003e\u003cli\u003eManufactured from 1\/8-inch laser-cut steel plate\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eIncludes necessary brackets and Grade 8 hardware\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness\n\u003c\/li\u003e\u003cli\u003eGreatly improves handling and performance\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e1-2 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eSubframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1974-1981 Pontiac Firebird\n\u003c\/li\u003e\u003cli\u003e1974-1981 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109464203627,"sku":"BMR-SFC321R","price":339.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109464236395,"sku":"BMR-SFC321H","price":339.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-SFC321R-1.jpg?v=1776329717"},{"product_id":"ford-mustang-chassis-braces-reinforcements-tbr003","title":"Lower Torque Box Reinforcement Plates \u003cbr\u003e 79-04 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 2016-newer Chevrolet Camaro with a twin-tube Strut Tower Brace from BMR's suspension. The Camaro chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR's Strut Tower Braces are manufactured from a mix of 1-inch DOM steel tubing and laser-cut 3\/16-inch steel plate. This design adds loads of strength to the front frame and suspension. These Strut Tower Braces are engineered to considerably strengthen the chassis. The STB019 connects the strut mounts to reinforce unibody and suspension.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1979-2004 Mustang \n\u003c\/li\u003e\u003cli\u003eReduces lower control arm mount deflection\n\u003c\/li\u003e\u003cli\u003e100% bolt-in design\n\u003c\/li\u003e\u003cli\u003eIncreases the amount of horsepower and torque that can safely be applied to the chassis\n\u003c\/li\u003e\u003cli\u003eCNC-laser cut, CNC-formed, MIG welded steel plate for precise fit\n\u003c\/li\u003e\u003cli\u003eIncludes all needed hardware \n\u003c\/li\u003e\u003cli\u003eBare, black hammertone, or red powdercoat finish\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eReinforcement Kit\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1979-2004 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109465842027,"sku":"BMR-TBR003R","price":79.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109465874795,"sku":"BMR-TBR003H","price":79.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-TBR003R.jpg?v=1776397671"},{"product_id":"ford-mustang-chassis-braces-reinforcements-tbr004","title":"Torque Box Reinforcement Plate Kit \u003cbr\u003e 79-04 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease stiffness and reinforce the torque boxed in your 1979-2004 Mustang with Torque Box Reinforcement Braces from BMR's suspension. The Fox-chassis Mustangs we not known for being super strong. When large amounts of torque are applied to the Fox chassis, the factory torque boxes are known to crack and rip. This causes all kinds of rearend alignment issues, poor performance, and unsafe driving conditions. Designed from CNC-laser cut, CNC-formed steel plate and DOM steel tubing, BMR's Torque Box Reinforcement Braces are designed to bolt into the 79-04 Mustang chassis, adding strength to the upper and lower control arm mounts. This means you can put as much power and torque to the wheels as possible, without fear of damaging this critical area of the chassis.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1979-2004 Mustang \n\u003c\/li\u003e\u003cli\u003eReduces upper and lower control arm mount deflection\n\u003c\/li\u003e\u003cli\u003eBolt-in design\n\u003c\/li\u003e\u003cli\u003eIncreases the amount of horsepower and torque that can safely be applied to the chassis\n\u003c\/li\u003e\u003cli\u003eCNC-laser cut, CNC-formed, MIG welded steel plate and DOM steel tubing for precise fit\n\u003c\/li\u003e\u003cli\u003eIncludes all needed hardware \n\u003c\/li\u003e\u003cli\u003eDurable powdercoat finish\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eReinforcement Kit\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1979-2004 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109466005867,"sku":"BMR-TBR004R","price":209.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109466038635,"sku":"BMR-TBR004H","price":209.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-TBR004R-1.jpg?v=1776330046"},{"product_id":"ford-mustang-chassis-braces-reinforcements-tbr005","title":"Tubular Upper Torque Box Reinforcement Plates \u003cbr\u003e 79-04 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease stiffness and reinforce the torque boxed in your 1979-2004 Mustang with Upper Torque Box Reinforcement Braces from BMR's suspension. The Fox-chassis Mustangs were not known for being super strong. When large amounts of torque are applied to the chassis, the factory torque boxes are known to crack and rip. This causes all kinds of rearend alignment issues, poor performance, and unsafe driving conditions. Designed from heavy-duty DOM steel tubing and CNC-laser cut, CNC-formed steel plate, BMR's Upper Torque Box Reinforcement Braces are designed to bolt into the 79-04 Mustang chassis, adding strength to the upper control arm mounts. This means you can put as much power and torque to the wheels as possible, without fear of damaging this critical area of the chassis.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1979-2004 Mustang \n\u003c\/li\u003e\u003cli\u003eReduces upper control arm mount deflection\n\u003c\/li\u003e\u003cli\u003eBolt-in design\n\u003c\/li\u003e\u003cli\u003eIncreases the amount of horsepower and torque that can safely be applied to the chassis\n\u003c\/li\u003e\u003cli\u003eHeavy-duty DOM steel tubing\n\u003c\/li\u003e\u003cli\u003eCNC-laser cut, CNC-formed, MIG welded steel plate for precise fit\n\u003c\/li\u003e\u003cli\u003eIncludes all needed hardware \n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eReinforcement Kit\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1979-2004 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109466169707,"sku":"BMR-TBR005R","price":159.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109466202475,"sku":"BMR-TBR005H","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-TBR005R-1.jpg?v=1776330051"},{"product_id":"ford-mustang-chassis-braces-reinforcements-aas001","title":"Control Arms Support Brace \u003cbr\u003e 05-14 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eImprove handling and increase front chassis and suspension rigidity on your S197 Mustang with an A-Arm Support Brace from BMR Suspension. During aggressive handling maneuvers with high speeds and sticky tires, extreme lateral loads are applied to the chassis and the factory components can flex dramatically. Manufactured from heavy-duty DOM steel tuning and CNC-formed laser-cut steel plate, BMR designed the AAS001 to stand up to the high loads of any performance environment. BMR's AAS001 reinforces the K-member at the rear A-arm mounts. This allows for higher lateral loads without K-member deflection reducing the car's handling capabilities. \n\nBMR designed the AAS001 for street performance, drag race, and handling applications. Connecting the A-arms mounts adds strength to the front suspension system and reduces K-member and suspension deflection. This allows for larger lateral loads without deflection causing dynamic alignment changes and erratic handling. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's AAS001 A-arm Support Brace is available in a black hammertone and red powder coat finish for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2005-2014 Mustang, 2007-2014 Shelby GT500\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eBolt-on design\n\u003c\/li\u003e\u003cli\u003eConnects the rear A-arms mounts\n\u003c\/li\u003e\u003cli\u003eReinforced K-member and front suspension\n\u003c\/li\u003e\u003cli\u003eAllows for higher lateral loads\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2007-2014 Ford Mustang Shelby GT500\n\u003c\/li\u003e\u003cli\u003e2005-2014 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109480489323,"sku":"BMR-AAS001R","price":79.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109480522091,"sku":"BMR-AAS001H","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/AAS001_large_a93f291d-b2ee-4699-9b6c-dd9555224253.jpg?v=1776395025"},{"product_id":"chevy-camaro-pontiac-firebird-chassis-braces-reinforcements-cb002","title":"Chassis Steering Brace \u003cbr\u003e 82-92 Chevy Camaro, Pontiac Firebird","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce sway bar mount deflection and add steering response to your 1985-1992 F-Body with a Chassis Steering Brace from BMR Suspension! Deflection in your vehicle¸MÙü front suspension system can reduce steering responsiveness and feel for the driver. BMR¸MÙü Chassis Steering Brace (CB002) minimizes sway bar mount and front suspension deflection and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR Suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1985-1992 GM F-Bodies\n\u003c\/li\u003e\u003cli\u003eManufactured from heavy-duty 1-inch DOM steel tubing\n\u003c\/li\u003e\u003cli\u003eLaser-cut sway bar support plates\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eGreatly reduces sway bar mount deflection\n\u003c\/li\u003e\u003cli\u003eIncreases steering feel and sway bar effectiveness\n\u003c\/li\u003e\u003cli\u003eMinimizes changes in NVH\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e1-2 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1982-1992 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e1982-1992 Pontiac Firebird\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109485273451,"sku":"BMR-CB002R","price":69.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109485306219,"sku":"BMR-CB002H","price":69.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CB002_large_361bc1b8-6aa3-4ac3-b88c-e7bccec9148d.jpg?v=1776395015"},{"product_id":"ford-mustang-chassis-braces-reinforcements-cb004","title":"Radiator Support Chassis Brace \u003cbr\u003e 05-14 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease chassis rigidity and improve handling on your 2005-2014 Mustang and 2007-2014 Shelby GT500 with a Chassis Brace from BMR Suspension! Using a Chassis Brace with a BMR K-member is great to reduce K-member deflection. BMR¸MÙü Radiator Support Chassis Brace (CB004) links the radiator support and BMR K-Member for more chassis rigidity and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR Suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2005-2014 S197 Mustangs\n\u003c\/li\u003e\u003cli\u003eFits 2007-2014 Shelby GT500s\n\u003c\/li\u003e\u003cli\u003eManufactured from 1-inch and 0.75-inch DOM steel tubing\n\u003c\/li\u003e\u003cli\u003eLaser-cut, CNC-formed steel plate\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eLinks the radiator support and BMR K-member\n\u003c\/li\u003e\u003cli\u003eStiffens up your Mustang¸MÙü front suspension\n\u003c\/li\u003e\u003cli\u003eReduces K-member deflection\n\u003c\/li\u003e\u003cli\u003eCompatible with the factory radiator support and BMR¸MÙü Radiator Support (RS003)\n\u003c\/li\u003e\u003cli\u003eCompatible with BMR K-members\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e1-2 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\n\u003c\/li\u003e\u003cli\u003eBMR¸MÙü CB004 is not compatible with factory K-members.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Radiator Supports\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2007-2014 Ford Mustang Shelby GT500\n\u003c\/li\u003e\u003cli\u003e2005-2014 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109485371755,"sku":"BMR-CB004R","price":129.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109485404523,"sku":"BMR-CB004H","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CB004_large_a0cab6ec-cfd3-4f78-86de-a2e16625646b.jpg?v=1776395014"},{"product_id":"ford-mustang-chassis-braces-reinforcements-crb740","title":"Control Arms Support Brace \u003cbr\u003e 94-04 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eAdd rigidity and support to the lower A-arms on your 1979-2004 Mustang with an A-arm Support Brace from BMR Suspension! The suspension geometry of your Mustang can change during normal and aggressive maneuvering. BMR¸MÙü A-arm Support Brace (CRB740) improves the handling of your vehicle and is designed for street performance and road racing applications. When performance is a must, rely on BMR Suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1979-2004 Mustangs\n\u003c\/li\u003e\u003cli\u003eManufactured from 0.1875-inch sheet metal and 1-inch DOM tubing\n\u003c\/li\u003e\u003cli\u003eUsed with a BMR Premium K-Member to help brace and strengthen the lower A-arms\n\u003c\/li\u003e\u003cli\u003eCompatible with BMR¸MÙü KM733, KM734, KM743, and KM744 K-Members\n\u003c\/li\u003e\u003cli\u003ePrevents cornering loads from changing suspension geometry\n\u003c\/li\u003e\u003cli\u003eImproves handling\n\u003c\/li\u003e\u003cli\u003eWorks with most headers\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e1 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1994-2004 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109486453099,"sku":"BMR-CRB740R","price":79.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109486485867,"sku":"BMR-CRB740H","price":79.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CRB740_large_efcc8183-747c-4f59-a8f7-4e8f33ce3c04.jpg?v=1776395008"},{"product_id":"chevy-camaro-pontiac-firebird-chassis-braces-reinforcements-dtb001","title":"Driveshaft Tunnel Brace \u003cbr\u003e 93-02 Chevy Camaro, Pontiac Firebird","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease floor and driveshaft tunnel rigidity on your Fourth Gen GM F-body with a Driveshaft Tunnel Brace from BMR Suspension. Built from 1-inch DOM steel tubing and CNC laser-cut 3\/16-inch steel plate, BMR's DTB001 Driveshaft Tunnel Brace is designed to support and stiffen the factory floor and tunnel brace. This increases chassis rigidity increasing the overall feel during aggressive maneuvering. BMR's DTB001's Driveshaft Tunnel Brace strengthens the floor and driveshaft tunnel for increased chassis stiffness. The design reinforces key points of the floor, effectively reducing deflection when lateral loads are applied to the chassis.\n\nBMR Suspension designed the DTB001 Driveshaft Tunnel Brace for any application. This 100% bolt-on brace uses existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Driveshaft Tunnel Brace reduces floor and driveshaft tunnel deflection with no change in NVH. This increases steering feel and stability on both the street and track. \n\n***NOTE - WILL NOT FIT CONVERTIBLE CHASSIS. NOT COMPATIBLE WITH BMR TRAK PAK.***\n\nBMR Suspension's DTB001 Driveshaft Tunnel Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is less than1 hour. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eInstalls with simple hand tools\n\u003c\/li\u003e\u003cli\u003eManufactured from 1-inch DOM steel tubing and CNC-laser cut 3\/16-inch steel\n\u003c\/li\u003e\u003cli\u003eReinforces the floor and driveshaft tunnel\n\u003c\/li\u003e\u003cli\u003eUsed factory boltholes and hardware\n\u003c\/li\u003e\u003cli\u003eWorks with stock and aftermarket headers and exhaust systems\n\u003c\/li\u003e\u003cli\u003eNo change in NVH\n\u003c\/li\u003e\u003cli\u003eDurable powdercoat finish\n\u003c\/li\u003e\u003cli\u003eAvailable in black hammertone and red powdercoat\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly built in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Tunnel Braces\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1993-2002 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e1993-2002 Pontiac Firebird\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109486977387,"sku":"BMR-DTB001R","price":109.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109487010155,"sku":"BMR-DTB001H","price":109.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/DTB001_large_1c08d163-8ad7-47cf-8750-d763cca66a98.jpg?v=1776395005"},{"product_id":"ford-mustang-chassis-braces-reinforcements-dtb002","title":"Rear Driveshaft Tunnel Brace \u003cbr\u003e 05-14 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease floor and driveshaft tunnel rigidity on your S197 Mustang with a Driveshaft Tunnel Brace from BMR Suspension. Built from CNC formed, CNC laser-cut 1\/4-inch steel plate, BMR's DTB002 Driveshaft Tunnel Brace is designed to support and stiffen the factory floor and tunnel brace. This increases chassis rigidity increasing the overall feel during aggressive maneuvering. BMR's DTB002's Driveshaft Tunnel Brace strengthens the floor and driveshaft tunnel for increased chassis stiffness. The design reinforces key points of the floor, effectively reducing deflection when lateral loads are applied to the chassis.\n\nBMR Suspension designed the DTB002 Driveshaft Tunnel Brace for any application. This 100% bolt-on brace uses existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Driveshaft Tunnel Brace reduces floor and driveshaft tunnel deflection with no change in NVH. This increases steering feel and stability on both the street and track. \n\nBMR Suspension's DTB002 Driveshaft Tunnel Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is less than1 hour. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eInstalls with simple hand tools\n\u003c\/li\u003e\u003cli\u003eManufactured from CNC-formed, CNC laser cut 1\/4-inch steel\n\u003c\/li\u003e\u003cli\u003eReinforces the floor and driveshaft tunnel\n\u003c\/li\u003e\u003cli\u003eUsed factory boltholes and hardware\n\u003c\/li\u003e\u003cli\u003eWorks with stock and aftermarket headers and exhaust systems\n\u003c\/li\u003e\u003cli\u003eNo change in NVH\n\u003c\/li\u003e\u003cli\u003eDurable powdercoat finish\n\u003c\/li\u003e\u003cli\u003eAvailable in black hammertone and red powdercoat\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly built in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Tunnel Braces\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2007-2014 Ford Mustang Shelby GT500\n\u003c\/li\u003e\u003cli\u003e2005-2014 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109487108459,"sku":"BMR-DTB002R","price":129.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109487141227,"sku":"BMR-DTB002H","price":129.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/DTB002_large_6f460edc-4b9c-48d2-adfa-6f1721261ac5.jpg?v=1776395004"},{"product_id":"pontiac-firebird-chevy-camaro-chassis-braces-reinforcements-dtb003","title":"Driveshaft Tunnel Brace \u003cbr\u003e 67-69 Pontiac Firebird, Chevy Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease floor and driveshaft tunnel rigidity on your first Gen GM F-body with a Driveshaft Tunnel Brace from BMR Suspension. Built from CNC formed, CNC laser-cut 1\/8-inch steel plate, BMR's DTB003 Driveshaft Tunnel Brace is designed to support and stiffen the factory floor and tunnel brace. This increases chassis rigidity increasing the overall feel during aggressive maneuvering. BMR's DTB003's Driveshaft Tunnel Brace strengthens the floor and driveshaft tunnel for increased chassis stiffness. The design reinforces key points of the floor, effectively reducing deflection when lateral loads are applied to the chassis.\n\nBMR Suspension designed the DTB003 Driveshaft Tunnel Brace for any application. This 100% bolt-on brace uses existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Driveshaft Tunnel Brace reduces floor and driveshaft tunnel deflection with no change in NVH. This increases steering feel and stability on both the street and track. \n\nBMR Suspension's DTB003 Driveshaft Tunnel Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is less than1 hour. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eInstalls with simple hand tools\n\u003c\/li\u003e\u003cli\u003eManufactured from CNC-formed, CNC laser cut 1\/8-inch steel\n\u003c\/li\u003e\u003cli\u003eReinforces the floor and driveshaft tunnel\n\u003c\/li\u003e\u003cli\u003eNot compatible with BMR Torque Arm Kits.\n\u003c\/li\u003e\u003cli\u003eWorks with stock and aftermarket headers and exhaust systems\n\u003c\/li\u003e\u003cli\u003eNo change in NVH\n\u003c\/li\u003e\u003cli\u003eDurable powdercoat finish\n\u003c\/li\u003e\u003cli\u003eAvailable in black hammertone and red powdercoat\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly built in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Tunnel Braces\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1967-1969 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e1967-1969 Pontiac Firebird\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109487239531,"sku":"BMR-DTB003R","price":149.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109487272299,"sku":"BMR-DTB003H","price":149.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/DTB003_large_5d41dffe-dad0-49d4-9c21-b34523d09c0b.jpg?v=1776395002"},{"product_id":"cadillac-cts-v-chassis-braces-reinforcements-psb001","title":"Pinion Support Brace \u003cbr\u003e 04-07 Cadillac CTS-V","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncrease U-joint life, launch consistency, and overall driveline efficiency with a pinion support brace from BMR Suspension. The factory first gen CTS-V front differential bushings controls pinion movement, but the soft factory rubber bushing allows for excessive pinion rise. This can lead to shortened U-joint life, as well as unwanted NVH. BMR's Pinion Support Brace (PSB001) greatly reduces pinion rise, giving you a much more stable feel. The pinion support brace uses a 95-durometer polyurethane to limit pinion movement. This eliminates the \"spongy\"\n\nBMR designed the PSB001 for street performance, drag race, and handling applications. The polyurethane bushings reduces deflection and pinion rise, giving you a much more responsive feel. When simply releasing the clutch at idle with the brake on, the stock, unsupported pinion measures up to two degrees of deflection. Aggressive driving loads this bushing significantly more allowing up to four degrees of pinion deflection before the OE bushing bottoms out. The pinion support brace reduces the power wasted, getting more power to the ground. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension PSB001 Pinion Support Brace is available in black hammertone or red powdercoat. Installation time is about 1 hour. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2004-2007 Cadillac CTS-V\n\u003c\/li\u003e\u003cli\u003eGreatly reduces the deflection of the front differential bushing\n\u003c\/li\u003e\u003cli\u003eReduces pinion rise\n\u003c\/li\u003e\u003cli\u003e100-percent bolt-on\n\u003c\/li\u003e\u003cli\u003eUses a 95-durometer polyurethane bushing\n\u003c\/li\u003e\u003cli\u003eIncreases throttle response\n\u003c\/li\u003e\u003cli\u003eExtends the life of the factory U-joints\n\u003c\/li\u003e\u003cli\u003eDurable powdercoat finish\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Pinion Supports\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2004-2007 Cadillac CTS-V\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109494808939,"sku":"BMR-PSB001R","price":89.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109494841707,"sku":"BMR-PSB001H","price":89.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/PSB001_large_32f1d7df-1297-4feb-a3f4-6022037a627b.jpg?v=1776394952"},{"product_id":"ford-mustang-chassis-braces-reinforcements-rs002","title":"Radiator Support w\/o Sway Bar Mount \u003cbr\u003e 05-14 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eLightening the front end of your 2005-2014 Mustang is easy with a radiator support from BMR Suspension. If you are drag racing your S197 Mustang and don't need a front sway bar, our Radiator Support can save an additional 11 pounds off the front end of the car. The factory radiator support is built overly strong because it must also support the additional loads of the front sway bar. With the swaybar removed, the crossmember only needs to support the weight of the radiator. Our lightweight crossmember only weighs 5.5 pounds as compared the OE 16.5 pounds Combined with sway bar removal, expect a 26.5-pound. weight reduction!\n\nBMR designed the RS002 Radiator Support for street performance and drag race applications where a front sway bar is not used. This is a direct replacement for the factory S197 radiator support. Reducing front weight can help improve performance and front weight percentage. The RS002 is 100-percent bolt-on and requires no fabrication or modifications. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's RS002 Radiator Support is available in black hammertone or red powdercoat for long-lasting good looks. Installation time is 1-2 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2005-2014 Ford Mustang\n\u003c\/li\u003e\u003cli\u003eEliminates the front sway bar\n\u003c\/li\u003e\u003cli\u003eReduces weight\n\u003c\/li\u003e\u003cli\u003eSimple bolt-on installation\n\u003c\/li\u003e\u003cli\u003eDurable powdercoat or polished stainless steel finish\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly built in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Radiator Supports\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2007-2014 Ford Mustang Shelby GT500\n\u003c\/li\u003e\u003cli\u003e2005-2014 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109495529835,"sku":"BMR-RS002R","price":129.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109495562603,"sku":"BMR-RS002H","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/RS002_large_4b8675e7-25e0-4a43-bf37-21d3a1b31c03.jpg?v=1776394947"},{"product_id":"ford-mustang-chassis-braces-reinforcements-rs003","title":"Radiator Support w\/ Sway Bar Mount \u003cbr\u003e 05-14 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eLightening the front end of your 2005-2014 Mustang is easy with a radiator support from BMR Suspension. If you want to drop weight off the nose of the car without eliminating the front sway bar, BMR's Radiator Support can save an additional 10 pounds off the front end of the car. The factory radiator support is built overly strong because it must also support the additional loads of the front sway bar. BMR's Radiator Support is manufactured from heavy duty 1-5\/8\" diameter DOM tubing and 1\/4\" laser cut mounting plates for OE comparable strength with race comparable weight. The BMR Radiator Support bolts in using the OE mounting hardware and provides heavy-duty mounts for your front sway bar, as well as the new 2011+ front chassis brace. Our lightweight support only weighs 6 pounds as compared the OE 16.5 pounds \n\nBMR designed the RS003 Radiator Support for street performance and drag race applications. This is a direct replacement for the factory S197 radiator support. Reducing front weight can help improve performance and front weight percentage. The RS003 is 100-percent bolt-on and requires no fabrication or modifications. When performance is a must, rely on BMR Suspension!\n\n***NOTE: When used in conjunction with our Tubular K-member and CB004 Chassis Brace, 2005-2010 cars can be upgraded to 2011 chassis specs.***\n\nBMR Suspension's RS003 Radiator Support is available in black hammertone or red powdercoat for long-lasting good looks. Installation time is 1-2 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2005-2014 Ford Mustang\n\u003c\/li\u003e\u003cli\u003eRetains the front sway bar mounts\n\u003c\/li\u003e\u003cli\u003eReduces weight\n\u003c\/li\u003e\u003cli\u003eSimple bolt-on installation\n\u003c\/li\u003e\u003cli\u003eDurable powdercoat or polished stainless steel finish\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly built in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Radiator Supports\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2007-2014 Ford Mustang Shelby GT500\n\u003c\/li\u003e\u003cli\u003e2005-2014 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109495660907,"sku":"BMR-RS003R","price":199.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109495693675,"sku":"BMR-RS003H","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/RS003_large_7592290e-cecc-4bc5-8218-90f56aa170f6.jpg?v=1776394945"},{"product_id":"chevy-camaro-pontiac-firebird-chassis-braces-reinforcements-sfc001","title":"Weld-On Boxed Subframe Connectors \u003cbr\u003e 93-02 Chevy Camaro, Pontiac Firebird","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 4th Gen GM F-body with two-point weld-in sub-frame connectors from BMR Suspension. The F-body chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR's F-body sub-frame connectors are manufactured from heavy-duty square steel tubing, with laser-cut CNC-formed 3\/16- and \n\nBMR has designed the SFC001 for the street performance, drag race, and handling applications. This two-point design solidly links the front and rear subframe, reducing chassis deflection, which is nothing more than wasted energy. This chassis deflection can also cause damage to the car causing windshields to break or doors to not close correctly. These subframe connectors add strength and rigidity, but also reduces squeaks and rattles commonly found in F-bodies. Simply weld them to the chassis and you've taken your performance to the next level. The tight, compact design gives you plenty of ground clearance for lowered vehicles without modifications to the floor pan. The square-tube design also gives you a safe and secure place to jack the car up, eliminating damage to the pinch welds, subframe, and floor pan. When performance is a must, rely on BMR Suspension!\n\nWhen performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC001 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits Fourth Gen GM F-bodies\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from 2-inch square steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16- and \n\u003c\/li\u003e\u003cli\u003eWeld-in design\n\u003c\/li\u003e\u003cli\u003eTwo attachment points for great chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1993-2002 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e1993-2002 Pontiac Firebird\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109497495915,"sku":"BMR-SFC001R","price":399.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109497528683,"sku":"BMR-SFC001H","price":399.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC001_large_e7a4204a-7ede-49c9-a313-d61f74135a00.jpg?v=1776394932"},{"product_id":"chevy-camaro-pontiac-firebird-chassis-braces-reinforcements-sfc002","title":"LT1 Weld-On Tubular Subframe Connectors \u003cbr\u003e 93-02 Chevy Camaro, Pontiac Firebird","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 1993-1997 4th Gen GM F-body with two-point weld-in sub-frame connectors from BMR Suspension. The F-body chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR's F-body sub-frame connectors are manufactured from heavy-duty 1 5\/8-inch steel tubing, with laser-cut CNC-formed 3\/16- and \n\nBMR has designed the SFC002 for the street performance, drag race, and handling applications. This two-point design solidly links the front and rear subframe, reducing chassis deflection, which is nothing more than wasted energy. This chassis deflection can also cause damage to the car causing windshields to break or doors to not close correctly. These subframe connectors add strength and rigidity, but also reduces squeaks and rattles commonly found in F-bodies. Simply weld them to the chassis and you've taken your performance to the next level. The tight, compact design gives you plenty of ground clearance for lowered vehicles without modifications to the floor pan. The tubular design also gives you a safe and secure place to jack the car up, eliminating damage to the pinch welds, subframe, and floor pan. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC002 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1993-1997 Fourth Gen GM F-bodies\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from 1 5\/8-inch steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16- and \n\u003c\/li\u003e\u003cli\u003eWeld-in design\n\u003c\/li\u003e\u003cli\u003eTwo attachment points for great chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1993-2002 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e1993-2002 Pontiac Firebird\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109497626987,"sku":"BMR-SFC002R","price":199.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109497659755,"sku":"BMR-SFC002H","price":199.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC002_large_283190e3-e819-4ee5-b881-324b224e1160.jpg?v=1776394931"},{"product_id":"chevy-camaro-pontiac-firebird-chassis-braces-reinforcements-sfc003","title":"LS1 Weld-On Tubular Subframe Connectors \u003cbr\u003e 93-02 Chevy Camaro, Pontiac Firebird","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 1998-2002 4th Gen GM F-body with two-point weld-in sub-frame connectors from BMR Suspension. The F-body chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR's F-body sub-frame connectors are manufactured from heavy-duty 1 5\/8-inch steel tubing, with laser-cut CNC-formed 3\/16- and \n\nBMR has designed the SFC003 for the street performance, drag race, and handling applications. This two-point design solidly links the front and rear subframe, reducing chassis deflection, which is nothing more than wasted energy. This chassis deflection can also cause damage to the car causing windshields to break or doors to not close correctly. These subframe connectors add strength and rigidity, but also reduces squeaks and rattles commonly found in F-bodies. Simply weld them to the chassis and you've taken your performance to the next level. The tight, compact design gives you plenty of ground clearance for lowered vehicles without modifications to the floor pan. The tubular design also gives you a safe and secure place to jack the car up, eliminating damage to the pinch welds, subframe, and floor pan. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC003 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1998-2002 Fourth Gen GM F-bodies\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from 1 5\/8-inch steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16- and \n\u003c\/li\u003e\u003cli\u003eWeld-in design\n\u003c\/li\u003e\u003cli\u003eTwo attachment points for great chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1993-2002 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e1993-2002 Pontiac Firebird\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109497725291,"sku":"BMR-SFC003R","price":199.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109497758059,"sku":"BMR-SFC003H","price":199.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC003_large_cb6be969-1d11-41f0-882b-5b5a4b42a6d3.jpg?v=1776394930"},{"product_id":"chevy-camaro-pontiac-firebird-chassis-braces-reinforcements-sfc004","title":"Weld-On Tubular Subframe Connector \u003cbr\u003e 93-02 Chevy Camaro, Pontiac Firebird","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 1998-2002 4th Gen GM F-body with two-point weld-in sub-frame connectors from BMR Suspension. The F-body chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR's F-body sub-frame connectors are manufactured from heavy-duty 1 5\/8-inch steel tubing, with laser-cut CNC-formed 3\/16- and \n\nBMR has designed the SFC004 for the street performance, drag race, and handling applications. This two-point design solidly links the front and rear subframe, reducing chassis deflection, which is nothing more than wasted energy. This chassis deflection can also cause damage to the car causing windshields to break or doors to not close correctly. These subframe connectors add strength and rigidity, but also reduces squeaks and rattles commonly found in F-bodies. Simply weld them to the chassis and you've taken your performance to the next level. The tight, compact design gives you plenty of ground clearance for lowered vehicles without modifications to the floor pan. The tubular design also gives you a safe and secure place to jack the car up, eliminating damage to the pinch welds, subframe, and floor pan. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC004 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1998-2002 Fourth Gen GM F-bodies (NON-CONVERTIBLE ONLY)\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from 1 5\/8-inch steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16- and \n\u003c\/li\u003e\u003cli\u003eWeld-in design\n\u003c\/li\u003e\u003cli\u003eTwo attachment points for great chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1993-2002 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e1993-2002 Pontiac Firebird\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109497790827,"sku":"BMR-SFC004R","price":319.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109497823595,"sku":"BMR-SFC004H","price":319.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC004_large_134aa2cc-4f0b-4ea2-9343-6609ce75e7cc.jpg?v=1776394929"},{"product_id":"pontiac-firebird-chevy-camaro-chassis-braces-reinforcements-sfc005","title":"Bolt-On Subframe Connectors \u003cbr\u003e 67-69 Pontiac Firebird, Chevy Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling on your 1967-1969 F-Body with a Bolt-On Subframe Connector Kit from BMR Suspension! In performance scenarios, the F-Body chassis can flex dramatically, even with mild amounts of torque and horsepower. BMR¸MÙü Bolt-On Subframe Connectors (SFC005) are considerably stronger than other subframe connectors on the market, allowing for a stiffer chassis in street performance, drag racing, and handling applications. When performance is a must, rely on BMR Suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1967-1969 GM F-Bodies\n\u003c\/li\u003e\u003cli\u003eManufactured from 2-inch square steel tubing\n\u003c\/li\u003e\u003cli\u003eIncludes necessary brackets and Grade 8 hardware\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eCompact design to prevent ground clearance issues\n\u003c\/li\u003e\u003cli\u003eConnects the front subframe and structural area of the rear subframe\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness\n\u003c\/li\u003e\u003cli\u003eGreatly improves handling and performance\n\u003c\/li\u003e\u003cli\u003eReduces squeaks and rattles\n\u003c\/li\u003e\u003cli\u003eAvailable in red or black hammertone powder coat for long lasting good looks\n\u003c\/li\u003e\u003cli\u003e1-2 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\n\u003c\/li\u003e\u003cli\u003eBMR¸MÙü SFC005 may require rerouting of the factory brake and fuel lines to be compatible with your vehicle.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1967-1969 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e1967-1969 Pontiac Firebird\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109497921899,"sku":"BMR-SFC005R","price":379.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109497954667,"sku":"BMR-SFC005H","price":379.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC005_large_44cd828f-50c1-4531-80be-e0fe49624c11.jpg?v=1776394928"},{"product_id":"pontiac-gto-chassis-braces-reinforcements-sfc007","title":"Weld-On Boxed Subframe Connectors \u003cbr\u003e 04-06 Pontiac GTO","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 2004-2006 Pontiac GTO with weld-in sub-frame connectors from BMR Suspension. The GTO chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR's GTO sub-frame connectors are manufactured from heavy-duty square steel tubing, with laser-cut CNC-formed 3\/16- and \n\nBMR has designed the SFC007 for the street performance, drag race, and handling applications. This two-point design solidly links the front and rear subframe, reducing chassis deflection, which is nothing more than wasted energy. This chassis deflection can also cause damage to the car causing windshields to break or doors to not close correctly. These subframe connectors add strength and rigidity, but also reduces squeaks and rattles commonly found in GTOs. Simply weld them to the chassis and you've taken your performance to the next level. The tight, compact design gives you plenty of ground clearance for lowered vehicles without modifications to the floor pan. The square-tube design also gives you a safe and secure place to jack the car up, eliminating damage to the pinch welds, subframe, and floor pan. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC007 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2004-2006 Pontiac GTO\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from 1.5x2-inch square steel tubing\n\u003c\/li\u003e\u003cli\u003eUses \n\u003c\/li\u003e\u003cli\u003eWeld-in design\n\u003c\/li\u003e\u003cli\u003eFour attachment points for great chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2004-2006 Pontiac GTO\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109498020203,"sku":"BMR-SFC007R","price":659.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109498052971,"sku":"BMR-SFC007H","price":659.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC007_large_06f5d7cd-bce7-4c7a-b0cf-5dccadc338bf.jpg?v=1776394927"},{"product_id":"chevy-camaro-pontiac-firebird-chassis-braces-reinforcements-sfc008","title":"Weld-On Boxed Subframe Connectors \u003cbr\u003e 82-92 Chevy Camaro, Pontiac Firebird","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 3rd Gen GM F-body with three-point weld-in sub-frame connectors from BMR Suspension. The F-body chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR's F-body sub-frame connectors are manufactured from heavy-duty rectangular steel tubing, with laser-cut CNC-formed 3\/16- and \n\nBMR has designed the SFC008 for the street performance, drag race, and handling applications. This three-point design solidly links the front and rear subframe, reducing chassis deflection, which is nothing more than wasted energy. This chassis deflection can also cause damage to the car causing windshields to break or doors to not close correctly. These subframe connectors add strength and rigidity, but also reduces squeaks and rattles commonly found in F-bodies. Simply weld them to the chassis and you've taken your performance to the next level. The tight, compact design gives you plenty of ground clearance for lowered vehicles without modifications to the floor pan. The rectangular-tube design also gives you a safe and secure place to jack the car up, eliminating damage to the pinch welds, subframe, and floor pan. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC008 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits Third Gen GM F-bodies (inside frame exhaust)\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from rectangular steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16- and \n\u003c\/li\u003e\u003cli\u003eWeld-in design\n\u003c\/li\u003e\u003cli\u003eThree attachment points for great chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1982-1992 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e1982-1992 Pontiac Firebird\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109498118507,"sku":"BMR-SFC008R","price":589.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109498151275,"sku":"BMR-SFC008H","price":589.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC008_large_7e9ec819-97fb-4791-b430-f9d92db74f47.jpg?v=1776394927"},{"product_id":"chevy-camaro-pontiac-firebird-chassis-braces-reinforcements-sfc009","title":"Weld-On Boxed Subframe Connectors \u003cbr\u003e 82-92 Chevy Camaro, Pontiac Firebird","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 3rd Gen GM F-body with three-point weld-in sub-frame connectors from BMR Suspension. The F-body chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR's F-body sub-frame connectors are manufactured from heavy-duty rectangular steel tubing, with laser-cut CNC-formed 3\/16- and \n\nBMR has designed the SFC009 for the street performance, drag race, and handling applications. This three-point design solidly links the front and rear subframe, reducing chassis deflection, which is nothing more than wasted energy. This chassis deflection can also cause damage to the car causing windshields to break or doors to not close correctly. These subframe connectors add strength and rigidity, but also reduces squeaks and rattles commonly found in F-bodies. Simply weld them to the chassis and you've taken your performance to the next level. The tight, compact design gives you plenty of ground clearance for lowered vehicles without modifications to the floor pan. The rectangular-tube design also gives you a safe and secure place to jack the car up, eliminating damage to the pinch welds, subframe, and floor pan. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC009 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits Third Gen GM F-bodies (outside frame exhaust)\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from rectangular steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16- and \n\u003c\/li\u003e\u003cli\u003eWeld-in design\n\u003c\/li\u003e\u003cli\u003eThree attachment points for great chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1982-1992 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e1982-1992 Pontiac Firebird\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109498216811,"sku":"BMR-SFC009R","price":519.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109498249579,"sku":"BMR-SFC009H","price":519.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC009_large_e6e4ef03-e0f3-4d7f-8273-04438b0d32d9.jpg?v=1776394926"},{"product_id":"ford-mustang-chassis-braces-reinforcements-sfc010","title":"Weld-On Boxed Subframe Connectors \u003cbr\u003e 79-93 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 1979-1993 Mustang with weld-in sub-frame connectors from BMR Suspension. The Fox chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR's Mustang sub-frame connectors are manufactured from heavy-duty rectangular steel tubing, with laser-cut CNC-formed 3\/16- and \n\nBMR has designed the SFC010 for the street performance, drag race, and handling applications. This two-point design solidly links the front and rear subframe, reducing chassis deflection, which is nothing more than wasted energy. This chassis deflection can also cause damage to the car causing windshields to break or doors to not close correctly. These subframe connectors add strength and rigidity, but also reduces squeaks and rattles commonly found in Mustangs. Simply weld them to the chassis and you've taken your performance to the next level. The tight, compact design gives you plenty of ground clearance for lowered vehicles without modifications to the floor pan. The rectangular-tube design also gives you a safe and secure place to jack the car up, eliminating damage to the pinch welds, subframe, and floor pan. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC010 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1979-1993 Ford Mustangs\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from rectangular steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16- and \n\u003c\/li\u003e\u003cli\u003eWeld-in design\n\u003c\/li\u003e\u003cli\u003eTwo attachment points for great chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1979-1993 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109498315115,"sku":"BMR-SFC010R","price":409.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109498347883,"sku":"BMR-SFC010H","price":409.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC010_large_db38aeca-b0e6-4c6e-8110-246a3960d7a2.jpg?v=1776394925"},{"product_id":"ford-mustang-chassis-braces-reinforcements-sfc011","title":"Weld-On Boxed Subframe Connectors \u003cbr\u003e 05-14 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 2005-2014 Mustang with weld-in sub-frame connectors from BMR Suspension. BMR's Mustang sub-frame connectors are manufactured from heavy-duty square and rectangular steel tubing, with laser-cut CNC-formed 3\/16-inch steel plate, adding loads of strength in all the right places. These sub-frame connectors are engineered to considerably strengthen the chassis. The SFC011s connect the front and rear sub-frames by connecting to the rear lower control arm mounts, dramatically strengthening the chassis. \n\nBMR has designed the SFC011 for the street performance, drag race, and handling applications. This design attaches to five points, solidly links the front and rear subframe, reducing chassis deflection. This chassis deflection can also cause damage to the car causing windshields to break or doors to not close correctly. These subframe connectors add strength and rigidity, but also reduces squeaks and rattles commonly found in Mustangs. Simply weld them to the chassis and you've taken your performance to the next level. The tight, compact design gives you plenty of ground clearance for lowered vehicles without modifications to the floor pan. The rectangular-tube design also gives you a safe and secure place to jack the car up, eliminating damage to the pinch welds, subframe, and floor pan. When performance is a must, rely on BMR Suspension!\n\n***NOTE - Interference with cooler lines on '13-'14 GT500 Track Pack models may occur.***\n\nBMR Suspension's SFC011 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2005-2014 Ford Mustangs\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from square and rectangular steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16- and \n\u003c\/li\u003e\u003cli\u003eWeld-in design\n\u003c\/li\u003e\u003cli\u003eFive attachment points for great chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2007-2014 Ford Mustang Shelby GT500\n\u003c\/li\u003e\u003cli\u003e2005-2014 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109498446187,"sku":"BMR-SFC011R","price":489.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109498478955,"sku":"BMR-SFC011H","price":489.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC011_large_94c74110-c217-475a-929e-5bdf79e1502f.jpg?v=1776394924"},{"product_id":"ford-mustang-chassis-braces-reinforcements-sfc012","title":"Weld-On Tubular Subframe Connectors \u003cbr\u003e 05-14 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 2005-2014 Mustang with tubular weld-in sub-frame connectors from BMR Suspension. The S197chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR's Mustang sub-frame connectors are manufactured from heavy-duty steel tubing, with laser-cut CNC-formed 3\/16-inch steel plate, adding loads of strength in all the right places. These sub-frame connectors are engineered to considerably strengthen the chassis. The SFC012s connect the front and rear sub-frames, dramatically strengthening the chassis. \n\nBMR has designed the SFC012 for the street performance, drag race, and handling applications. This design attaches to two points, solidly links the front and rear subframe, reducing chassis deflection. This chassis deflection can also cause damage to the car causing windshields to break or doors to not close correctly. These subframe connectors add strength and rigidity, but also reduces squeaks and rattles commonly found in Mustangs. Simply weld them to the chassis and you've taken your performance to the next level. The tight, compact design gives you plenty of ground clearance for lowered vehicles without modifications to the floor pan. The rectangular-tube design also gives you a safe and secure place to jack the car up, eliminating damage to the pinch welds, subframe, and floor pan. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC012 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\n\n\nNOTE: Fits v8 and v6 models. Will also fit convertibles if rear bracing is removed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2005-2014 Ford Mustangs\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16-inch laser-cut, CNC-formed steel plate\n\u003c\/li\u003e\u003cli\u003eWeld-in design\n\u003c\/li\u003e\u003cli\u003eTwo attachment points for great chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2007-2014 Ford Mustang Shelby GT500\n\u003c\/li\u003e\u003cli\u003e2005-2014 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109498544491,"sku":"BMR-SFC012R","price":179.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109498577259,"sku":"BMR-SFC012H","price":179.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC012_large_4332e3b4-2607-430a-89b4-62989ed26156.jpg?v=1776394923"},{"product_id":"chevy-ss-pontiac-g8-chassis-braces-reinforcements-sfc013","title":"Bolt-On Subframe Connectors \u003cbr\u003e 08-17 Chevy SS, Pontiac G8","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your Pontiac G8 or Chevy SS with three-point bolt-in sub-frame connectors from BMR Suspension. These chassis flex dramatically, even with mild amounts of torque and horsepower. BMR's sub-frame connectors are manufactured from a mix of heavy-duty square steel tubing, with laser-cut CNC-formed 3\/16-inch steel plate, and add loads of strength in all the right places. These triangulated sub-frame connectors are engineered to considerably strengthen the chassis. The SFC013s connect the front and rear sub-frames, but also tie into the rear lower control arm mounts, as well as the transmission tunnel brace. \n\nBMR has designed the SFC013 for the street performance, drag race, and handling applications. This four-point design is far superior to other subframe connectors on the market. The SFC013s solidly link the front and rear subframe, where others only connect the front subframe to the lower control arm mount. This does little to keep the rear of the chassis from flexing. Connecting both sub-frames and the lower control arm mount and transmission tunnel brace, these sub-frame connectors are the ultimate in chassis stiffening. BMR's SFC013 subframe connectors are 100% bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC013 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.\n\nThese Sub-Frame Connectors only install correctly with an Adaptor from Livernois Motorsports\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2008-2009 Pontiac G8 and 2014-2016 Chevy SS\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from square steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16-inch laser-cut, CNC-formed steel plate\n\u003c\/li\u003e\u003cli\u003e100% bolt-in design\n\u003c\/li\u003e\u003cli\u003eThree attachment points for superior chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eIncludes all needed brackets and hardware\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2014-2017 Chevrolet SS\n\u003c\/li\u003e\u003cli\u003e2008-2009 Pontiac G8\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109498642795,"sku":"BMR-SFC013R","price":409.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":53109498675563,"sku":"BMR-SFC013H","price":409.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC013_large_a03f9500-61f1-42ad-bfae-b81516893ece.jpg?v=1776394922"},{"product_id":"chevy-camaro-chassis-braces-reinforcements-sfc015","title":"Bolt-On Subframe Connectors \u003cbr\u003e 10-15 Chevy Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 2010-2015 Camarowith three-point bolt-in sub-frame connectors from BMR Suspension. These chassis flex dramatically, even with mild amounts of torque and horsepower. BMR's sub-frame connectors are manufactured from a mix of heavy-duty square steel tubing, with laser-cut CNC-formed 3\/16-inch steel plate, and add loads of strength in all the right places. These triangulated sub-frame connectors are engineered to considerably strengthen the chassis. The SFC015s connect the front and rear sub-frames, but also tie into the rear lower control arm mounts, as well as the transmission tunnel brace. \n\nBMR has designed the SFC015 for the street performance, drag race, and handling applications. This four-point design is far superior to other subframe connectors on the market. The SFC015s solidly link the front and rear subframe, where others only connect the front subframe to the lower control arm mount. This does little to keep the rear of the chassis from flexing. Connecting both sub-frames and the lower control arm mount and transmission tunnel brace, these sub-frame connectors are the ultimate in chassis stiffening. BMR's SFC015 subframe connectors are 100% bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC015 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2010-2015\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from square steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16-inch laser-cut, CNC-formed steel plate\n\u003c\/li\u003e\u003cli\u003e100% bolt-in design\n\u003c\/li\u003e\u003cli\u003eThree attachment points for superior chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eIncludes all needed brackets and hardware\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2010-2015 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109498773867,"sku":"BMR-SFC015R","price":389.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109498806635,"sku":"BMR-SFC015H","price":389.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC015_large_05060176-d5df-48bc-b24e-ea86958b92c0.jpg?v=1776394922"},{"product_id":"chevy-camaro-pontiac-firebird-chassis-braces-reinforcements-sfc019","title":"Subframe Connectors \u003cbr\u003e 93-02 Chevy Camaro, Pontiac Firebird","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eBolt-in subframe connectorReduce chassis flex and increase handling and performance on your 4th Gen GM F-body with four-point bolt-in sub-frame connectors from BMR Suspension. The F-body chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR's F-body sub-frame connectors are manufactured from a mix of heavy-duty 2- x 2-inch, 0.083-inch wall and 1- x 1-inch, 0.083-inch wall square steel tubing, with laser-cut CNC-formed 3\/16-inch steel plate. This design add loads of strength in all the right places. These four-point sub-frame connectors are engineered to considerably strengthen the chassis. The SFC019s connect the front and rear sub-frames, but also tie into the rear lower control arm mounts, as well as the transmission tunnel brace. \n\nBMR has designed the SFC019 for the street performance, drag race, and handling applications. This four-point design is far superior to other subframe connectors on the market. The SFC019s solidly link the front and rear subframe, where others only connect the front subframe to the lower control arm mount. This does little to keep the rear of the chassis from flexing. Connecting both sub-frames and the lower control arm mount and transmission tunnel brace, these sub-frame connectors are the ultimate in chassis stiffening for F-bodies. BMR's SFC019 subframe connectors are 100% bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC019 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits Fourth Gen GM F-bodies\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from 2- x 2-inch, 0.083-inch wall and 1- x 1-inch, 0.083-inch wall square steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16-inch laser-cut, CNC-formed steel plate\n\u003c\/li\u003e\u003cli\u003e100% bolt-in design\n\u003c\/li\u003e\u003cli\u003eFour attachment points for superior chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eIncludes all needed brackets and hardware\n\u003c\/li\u003e\u003cli\u003eDoes not fit convertible models\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1993-2002 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e1993-2002 Pontiac Firebird\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109498872171,"sku":"BMR-SFC019R","price":609.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109498904939,"sku":"BMR-SFC019H","price":609.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC019_large_c2f12f6f-b923-4b64-b28e-2463faf8d66b.jpg?v=1776394921"},{"product_id":"chevy-camaro-pontiac-firebird-chassis-braces-reinforcements-sfc020","title":"Subframe Connectors \u003cbr\u003e 93-02 Chevy Camaro, Pontiac Firebird","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 4th Gen GM F-body with four-point weld-in sub-frame connectors from BMR Suspension. BMR's F-body sub-frame connectors are manufactured from a mix of heavy-duty 2- x 2-inch, 0.083-inch wall and 1- x 1-inch, 0.083-inch wall square steel tubing, with laser-cut CNC-formed 3\/16-inch steel plate. This design add loads of strength in all the right places. These four-point sub-frame connectors are engineered to considerably strengthen the chassis. The SFC020s connect the front and rear sub-frames, but also tie into the rear lower control arm mounts, as well as the transmission tunnel brace. \n\nBMR has designed the SFC020 for the street performance, drag race, and handling applications. This four-point design is far superior to other subframe connectors on the market. The SFC020s solidly link the front and rear subframe, where others only connect the front subframe to the lower control arm mount. This does little to keep the rear of the chassis from flexing. Connecting both sub-frames and the lower control arm mount and transmission tunnel brace, these sub-frame connectors are the ultimate in chassis stiffening for F-bodies. BMR's SFC020 subframe connectors are designed to be welded into your F-body, making them a permanent part of the chassis. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC020 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits Fourth Gen GM F-bodies\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from heavy-duty 2- x 2-inch, 0.083-inch wall and 1- x 1-inch, 0.083-inch wall square steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16-inch laser-cut, CNC-formed steel plate\n\u003c\/li\u003e\u003cli\u003eWeld-in design\n\u003c\/li\u003e\u003cli\u003eFour attachment points for superior chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eDoes not fit convertible models\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1993-2002 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e1993-2002 Pontiac Firebird\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109499003243,"sku":"BMR-SFC020R","price":579.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109499036011,"sku":"BMR-SFC020H","price":579.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC020_large_95af1434-6756-4936-b7c1-ea8bfd70773a.jpg?v=1776394920"},{"product_id":"chevy-camaro-pontiac-firebird-chassis-braces-reinforcements-sfc023","title":"Subframe Connectors \u003cbr\u003e 93-02 Chevy Camaro, Pontiac Firebird","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce chassis flex and increase handling and performance on your 4th Gen GM F-body with two-point bolt-on sub-frame connectors from BMR Suspension. The F-body chassis flexes dramatically, even with mild amounts of torque and horsepower. The BMR sub-frame connectors are manufactured from 2 x 2 inch heavy-duty square steel tubing and laser-cut CNC-formed 3\/16-inch steel plate. Other suspension companies use an inferior, round-tube design. BMR engineered these bolt-on sub-frame connectors to be considerably stronger than other sub-frame connectors on the market. The SFC023s connect the front and rear sub-frames, linking the front and rear of the chassis together.\n\nBMR has designed the SFC023 for the street performance, drag race, and handling applications. This two-point design is far superior to other subframe connectors on the market. The SFC023s solidly link the front and rear subframe, where others only connect the front subframe to the lower control arm mount. This does little to keep the rear of the chassis from flexing. BMR's SFC023 sub-frame connectors are 100% bolt-on. This means they can be easily installed with simple hand tools, and no welding is required. When performance is a must, rely on BMR Suspension!\n\nBMR Suspension's SFC023 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits Fourth Gen GM F-bodies\n\u003c\/li\u003e\u003cli\u003eDramatically increases chassis stiffness and improves handling\n\u003c\/li\u003e\u003cli\u003eManufactured from 2- x 2-inch, 0.083-inch wall square steel tubing\n\u003c\/li\u003e\u003cli\u003eUses 3\/16-inch laser-cut, CNC-formed steel plate\n\u003c\/li\u003e\u003cli\u003e100% bolt-in design\n\u003c\/li\u003e\u003cli\u003eTwo attachment points for superior chassis stiffening\n\u003c\/li\u003e\u003cli\u003eFully MIG-welded\n\u003c\/li\u003e\u003cli\u003eIncludes all needed brackets and hardware\n\u003c\/li\u003e\u003cli\u003eNon convertible models only\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eProudly designed and made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Subframe Connectors\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1993-2002 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e1993-2002 Pontiac Firebird\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109499134315,"sku":"BMR-SFC023R","price":379.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109499167083,"sku":"BMR-SFC023H","price":379.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SFC023_large_b61b6a8c-7f8f-4590-af50-b5da56fe53ad.jpg?v=1776394919"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/collections\/CB005R.jpg?v=1776307863","url":"https:\/\/caautoparts.com\/collections\/bmr-suspension-chassis-braces-reinforcements.oembed","provider":"CA Auto Parts","version":"1.0","type":"link"}