{"title":"BMR Suspension Cradle Bushings","description":null,"products":[{"product_id":"cadillac-cts-v-cradle-bushings-awk001","title":"Anti-Wheel Hop Kit \u003cbr\u003e 04-07 Cadillac CTS-V","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce Wheelhop, bushing deflection, and cradle movement on your 2004-2005 Cadillac CTS-V with an Anti Wheelhop Kit from BMR Suspension. Built from DOM steel tubing and billet aluminum, BMR's AWK001 Anti Wheelhop Kit is designed to reduce cradle bushing deflection, which is one of the biggest causes of wheelhop. BMR's AWK001's upper bushing lockout rings capture the bushing sleeves, nearly eliminating movement on any plane (fore\/aft, lateral, and vertical). The cradle brace connects mounting locations on the cradle adding extra strength to the IRS.\n\nBMR Suspension designed the AWK001 Kit for any application. This 100% bolt-on kit use existing bolt holes and hardware, allowing for easy installation with simple hand tools. Once installed, the Anti Wheelhop Kit reduces bushing and cradle deflection with nearly no change in NVH. BMR Suspension's AWK001 Anti Wheelhop Kit allows you to affordably and effectively lessens wheelhop, bushing deflection, and cradle movement.\n\n***NOTE: May not be compatible with some aftermarket exhaust systems.***\n\nBMR Suspension's AWK001 Anti Wheelhop Kit is available in black hammertone or red powdercoat for long-lasting good looks. Installation time is 2-3 hours. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eFits 2004-2005 Cadillac CTS-V\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eInstalls with simple hand tools\n\u003c\/li\u003e\u003cli\u003eDOM steel cradle brace\n\u003c\/li\u003e\u003cli\u003eCNC-laser cut bushing lockout rings\n\u003c\/li\u003e\u003cli\u003eBillet aluminum bushing lockouts\n\u003c\/li\u003e\u003cli\u003eGreatly reduces stock subframe bushing deflection and wheel-hop\n\u003c\/li\u003e\u003cli\u003eUses factory bolt-holes and hardware\n\u003c\/li\u003e\u003cli\u003eDurable powdercoat finish\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly built in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2004-2007 Cadillac CTS-V\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":53109480620395,"sku":"BMR-AWK001R","price":349.95,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":53109480653163,"sku":"BMR-AWK001H","price":349.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/AWK001_large_f8e7e27e-15b9-4f49-bd30-1645d8a03982.jpg?v=1776395025"},{"product_id":"chevrolet-camaro-cradle-bushings-bmrbk024","title":"Rear Cradle Pro Version Full Bushing Kit \u003cbr\u003e 10-15 Chevrolet Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eEnhance the stability of your 2010 - 2015 Chevrolet Camaro by minimizing rear cradle movement with Rear Cradle Bushings from BMR's suspension. Polyurethane is a synthetic polymer that has many properties that make it far superior to OEM rubber bushings. Polyurethane deflects far less that soft rubber, and it doesn't breakdown from exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment suspension bushings live in. BMR's polyurethane Rear Cradle Bushings drastically increase stability over the factory rubber bushings, by nearly eliminating the deflection seen in stock cradle bushings. BMR designed its polyurethane cradle bushings from 95-durometer polyurethane. This material offers huge reductions in deflection without excessive increases in NVH. Each bushing is manufactured to strict tolerances, using exact molds, which are designed by BMR. This allows for a perfect fit and increased performance for any driving style. BMR's Rear Cradle Bushings offer huge increases in performance over the stock rubber bushings. The OE bushings are designed with air pockets and are made from soft rubber. These voids, coupled with soft material produce excessive cradle movement during aggressive maneuvering. This movement is one of the biggest contributors to wheel hop. BMR's polyurethane cradle bushings replace the entire OE rubber bushing. This eliminates almost all cradle movement, increases handling stability, and cornering ability, while giving you a much-improved overall feel in any performance driving situation. The reduction in cradle movement also drastically reduces wheel hop, caused by excessive bushing deflection. Designed for street performance, drag race, and handling applications, BMR's suspension BK024 Rear Cradle Bushings are the perfect solution for any Camaro being used for performance driving.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2010-2015 Chevrolet Camaros\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003e95-durometer polyurethane bushings\n\u003c\/li\u003e\u003cli\u003eDecreased bushing deflection\n\u003c\/li\u003e\u003cli\u003eZinc-coated inner sleeves\n\u003c\/li\u003e\u003cli\u003e3-5 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eRear Cradle Bushings\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2010-2015 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109523022187,"sku":"BMR-BK024","price":419.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-BK024-1.jpg?v=1776328443"},{"product_id":"ford-mustang-cradle-bushings-bmrbk047","title":"Rear Cradle Bushing Kit \u003cbr\u003e 15-24 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eSignificantly reduce rear cradle movement in your S550 or S650 Mustang with a Polyurethane Rear Cradle Bushing Kit from BMR's suspension. These bushings are made from low-deflection, 95-durometer polyurethane, which is known for its high stiffness, low friction and excellent stability. This product greatly reduces bushing deflection that occurs during acceleration, cornering, and braking with only moderate increases in NVH. Each bushing is designed to exact tolerances, which are designed by BMR. This allows for a perfect fit and increased performance for any driving style. The BMR Poly Rear Cradle Bushing Kit (BK047) greatly increases the rigidity and stability of the chassis to provide maximum control and consistency necessary for any form of competition or high performance street driving. Designed for street performance, drag race, and handling applications, BMR's suspension BK047 Poly Cradle Bushings are the perfect wheelhop solution for any S550 or S650 Mustang where NVH is not a concern. BMR's Rear Cradle Bushings reduce cradle movement over the stock rubber bushings. The OE bushings are designed with air pockets and are made from soft rubber. These voids, coupled with soft material produce excessive differential movement during normal and aggressive driving. BMR's poly cradle bushings replace the entire OE rubber bushing, minimizing differential movement by replacing the soft rubber OE bushings with solid two-piece poly bushings. This reduces cradle movement, reducing wheelhop and increases handling stability, while giving you a much-improved overall feel in any performance driving situation. BMR's suspensions BK047 Differential Busing Kit is available in red with zinc-coated hardware. Installation time is about 3-4 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2023 S550 and 2024 S650 Mustangs\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003e95-durometer polyurethane cradle bushings\n\u003c\/li\u003e\u003cli\u003eOversized 6061-T6 billet aluminum inner bushing sleeves\n\u003c\/li\u003e\u003cli\u003eReduces bushing deflection\n\u003c\/li\u003e\u003cli\u003eGreatly reduces wheelhop\n\u003c\/li\u003e\u003cli\u003e3-4 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eRear Cradle Bushings\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2015-2024 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109523087723,"sku":"BMR-BK047","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-BK047-1.jpg?v=1776328456"},{"product_id":"ford-mustang-cradle-bushings-bmrbk048","title":"Rear Cradle Bushing Kit \u003cbr\u003e 15-24 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eEliminate rear cradle movement in your S550 or S650 Mustang with a Aluminum Rear Cradle Bushing Kit from BMR's suspension. The OE bushings are designed with air pockets and are made from soft rubber. These voids, coupled with soft material produce excessive rear cradlel movement during normal and aggressive driving. These bushings are CNC-machined from Aluminum, which is known for its high stiffness, low friction and excellent dimensional stability. This material eliminates deflection with only moderate increases in NVH. Each bushing is machined to exact tolerances, which are designed by BMR. This allows for a perfect fit and increased performance for any driving style. The BMR Aluminum Rear Cradle Bushing Kit (BK048) greatly increases the rigidity and stability of the chassis to provide maximum control and consistency necessary for any form of competition or high performance street driving.Designed for max effort street performance, drag race, and handling applications, BMR's suspension BK048 Aluminum Cradle Bushings are the perfect wheelhop solution for any S550 Mustang where NVH is not a concern. BMRs Aluminum cradle bushings replace the entire OE rubber bushing, eliminating differential movement by replacing the soft rubber OE bushings with solid two-piece Aluminum bushings. These bushings remove all movement between the rear cradle and chassis, eliminating the deflection that occurs during acceleration, cornering, and braking. This reduces wheelhop and increases handling stability, while giving you a much-improved overall feel in any performance driving situation.BMR's suspensions BK048 Aluminum Rear Cradle Busing Kit is available in black. Installation time is about 3-4 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2023 S550 and 2024 S650 Mustangs\n\u003c\/li\u003e\u003cli\u003eDesigned for max effort street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eAluminum cradle bushings\n\u003c\/li\u003e\u003cli\u003eCenters the rear cradle \n\u003c\/li\u003e\u003cli\u003eEliminates bushing deflection\n\u003c\/li\u003e\u003cli\u003eGreatly reduces wheelhop\n\u003c\/li\u003e\u003cli\u003e3-4 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eRear Cradle Bushings\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2015-2024 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109523120491,"sku":"BMR-BK048","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-BK048-1.jpg?v=1776328460"},{"product_id":"ford-mustang-cradle-bushings-bmrbk053","title":"Rear Cradle Steel Inserts Only Bushing Kit \u003cbr\u003e 15-24 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce wheelhop, bushing deflection, and cradle movement on your S550 or S650 Mustang with a Cradle Bushing Insert Kit from BMR's suspension. Built from CNC laser cut and CNC formed stainless steel, BMR's BK053 Cradle Bushing Insert Kit is designed to reduce cradle bushing deflection, which is one of the biggest causes of wheelhop. BMR's BK053's stainless steel bushing inserts (front) fill the voids in the stock cradle bushings, reducing the amount of deflection. The lower bushing locating plates (rear) capture the bottom portion of the bushing cups, minimizing vertical deflection. BMR's suspension designed the BK053 Cradle Bushing Insert Kit for any application. This 100% bolt-on kit uses existing hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Bushing Insert Kit reduces cradle bushing deflection with no change in NVH. (During BMR's testing, no change in NVH was observed without accompanying modifications.) BMR's suspensions BK053 Cradle Bushing Insert Kit is the most affordable way to reduce bushing deflection, with zero change in NVH. BMR's suspensions BK053 Cradle Bushing Insert Kit is available in stainless steel for long-lasting good looks and no corrosion problems. Installation time is about 1 hour. Proudly made in the U.S.A.! NOTE: This kit is not compatible with BMR's CB005 kit. For best performance, the CB005 kit is recommended.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2023 S550 and 2024 S650 Mustangs\n\u003c\/li\u003e\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eInstalls with simple hand tools\n\u003c\/li\u003e\u003cli\u003eLaser cut, CNC-formed stainless steel plates\n\u003c\/li\u003e\u003cli\u003eLaser-cut lower bushing support plates\n\u003c\/li\u003e\u003cli\u003eGreatly reduces stock bushing deflection and wheelhop \n\u003c\/li\u003e\u003cli\u003eZero increase in NVH\n\u003c\/li\u003e\u003cli\u003eUsed factory bolt holes and hardware\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly built in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eRear Cradle Bushings\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2015-2024 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109523874155,"sku":"BMR-BK053","price":54.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-BK053-1.jpg?v=1776328474"},{"product_id":"chevrolet-camaro-cradle-bushings-bmrbk061","title":"Rear Cradle Bushing Kit \u003cbr\u003e 16-24 Chevrolet Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eSignificantly reduce rear cradle movement in your Sixth Gen Camaro with a Polyurethane Rear Cradle Bushing Kit from BMR's suspension. These bushings are made from low-deflection, 95-durometer polyurethane, which is known for its high stiffness, low friction and excellent stability. This product greatly reduces bushing deflection that occurs during acceleration, cornering, and braking with only moderate increases in NVH. Each bushing is designed to exact tolerances, which are designed by BMR. This allows for a perfect fit and increased performance for any driving style. The BMR Poly Rear Cradle Bushing Kit (BK061) greatly increases the rigidity and stability of the chassis to provide maximum control and consistency necessary for any form of competition or high performance street driving. Designed for street performance, drag race, and handling applications, BMR's suspension BK061 Poly Cradle Bushings are the perfect wheelhop solution for any Sixth Gen Camaro where NVH is not a concern. BMR's Rear Cradle Bushings reduce cradle movement over the stock rubber bushings. The OE bushings are designed with air pockets and are made from soft rubber. These voids, coupled with soft material produce excessive differential movement during normal and aggressive driving. BMR's poly cradle bushings replace the entire OE rubber bushing, minimizing differential movement by replacing the soft rubber OE bushings with solid two-piece poly bushings. This reduces cradle movement, reducing wheelhop and increases handling stability, while giving you a much-improved overall feel in any performance driving situation. BMR's suspensions BK061 Differential Busing Kit is available in red with zinc-coated hardware. Installation time is about 3-4 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2016-newer Chevrolet Camaro \n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003e95-durometer polyurethane cradle bushings\n\u003c\/li\u003e\u003cli\u003eOversized 6061-T6 billet aluminum inner bushing sleeves\n\u003c\/li\u003e\u003cli\u003eReduces bushing deflection\n\u003c\/li\u003e\u003cli\u003eGreatly reduces wheelhop\n\u003c\/li\u003e\u003cli\u003e3-4 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eRear Cradle Bushings\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2016-2024 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109524398443,"sku":"BMR-BK061","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-BK061-1.jpg?v=1776328494"},{"product_id":"chevrolet-camaro-cradle-bushings-bmrbk062","title":"Rear Cradle Bushing Kit \u003cbr\u003e 16-24 Chevrolet Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eEliminate rear cradle movement in your 2016-newer Chevrolet Camaro with a Delrin Rear Cradle Bushing Kit from BMR's suspension. The OE bushings are designed with air pockets and are made from soft rubber. These voids, coupled with soft material produce excessive differential movement during normal and aggressive driving. These bushings are CNC-machined from Delrin, which is known for its high stiffness, low friction and excellent dimensional stability. This material eliminates deflection with only moderate increases in NVH. Each bushing is machined to exact tolerances, which are designed by BMR. This allows for a perfect fit and increased performance for any driving style. The BMR Delrin Rear Cradle Bushing Kit (BK062) greatly increases the rigidity and stability of the chassis to provide maximum control and consistency necessary for any form of competition or high performance street driving. Designed for max effort street performance, drag race, and handling applications, BMR's suspension BK062 Delrin Cradle Bushings are the perfect wheelhop solution for any Sixth Gen Camaro where NVH is not a concern. BMR's Delrin cradle bushings replace the entire OE rubber bushing, eliminating differential movement by replacing the soft rubber OE bushings with solid two-piece Delrin bushings. These bushings remove all movement between the rear cradle and chassis, eliminating the deflection that occurs during acceleration, cornering, and braking. This reduces wheelhop and increases handling stability, while giving you a much-improved overall feel in any performance driving situation. BMR's suspensions BK062 Differential Busing Kit is available in black. Installation time is about 3-4 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2016-newer Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003eDesigned for max effort street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eDelrin cradle bushings\n\u003c\/li\u003e\u003cli\u003eZinc-coated inner sleeves \n\u003c\/li\u003e\u003cli\u003eEliminates bushing deflection\n\u003c\/li\u003e\u003cli\u003eGreatly reduces wheelhop\n\u003c\/li\u003e\u003cli\u003e3-4 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eRear Cradle Bushings\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2016-2024 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109524431211,"sku":"BMR-BK062","price":619.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-BK062-1.jpg?v=1776328497"},{"product_id":"chevrolet-camaro-cradle-bushings-bmrbk063","title":"Rear Cradle Lockout Bushing Kit \u003cbr\u003e 16-24 Chevrolet Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce Wheelhop, bushing deflection, and cradle movement on your 2016-newer Chevrolet Camaro with a Cradle Bushing Lockout Kit from BMR's suspension. Built from CNC-machines Delrin, laser-cut stainless steel, and billet aluminum, BMR's BK063 Cradle Bushing Lockout Kit is designed to greatly reduce cradle bushing deflection, which is one of the biggest causes of wheelhop. BMR's BK063s Delrin upper bushing inserts are CNC-machined and specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum bullet inserts. The kit is finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. By filling the voids in the bushings, deflection is greatly reduced, allowing more power and torque to be transferred to the ground instead of being absorbed by the chassis. BMR's suspension designed the BK063 Cradle Bushing Lockout Kit for street performance, drag race, and handling applications. This 100% bolt-on kit use existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Bushing Lockout Kit minimized bushing and cradle deflection with nearly no change in NVH. (During BMR's testing, no change in NVH was observed without accompanying modifications.) BMR's suspensions BK063 Cradle Bushing Lockout Kit is the only part you need to affordably and effectively lessen wheelhop, bushing deflection, and cradle movement. Throughout testing, BMR has seen about an 80%-90% reduction in fore\/aft and lateral cradle bushing deflection. A car with no other mods and stock tires that isn't driven overly hard is going to see a 90% or higher reduction, while a more race oriented Camaros with sticky tires will see slightly less of a reduction. Launching the test vehicle at over 7,000 rpm on drag radials, BMR'saw about an 80% reduction in bushing deflection.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e100% bolt-on design\n\u003c\/li\u003e\u003cli\u003eNo fabrication needed\n\u003c\/li\u003e\u003cli\u003eInstalls with simple hand tools\n\u003c\/li\u003e\u003cli\u003eCNC-machined Delrin Bushing Inserts\n\u003c\/li\u003e\u003cli\u003eCNC-machined 6061-T6 billet aluminum bushing insert bullets\n\u003c\/li\u003e\u003cli\u003eLaser-cut stainless steel lower bushing support washers\n\u003c\/li\u003e\u003cli\u003eGreatly reduces stock bushing deflection, wheelhop, and cradle deflection \n\u003c\/li\u003e\u003cli\u003eUsed factory bolt holes and hardware\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly built in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eRear Cradle Lockout\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2016-2024 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109524595051,"sku":"BMR-BK063","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BMR-BK063-1.jpg?v=1776328500"},{"product_id":"chevy-ss-camaro-pontiac-g8-cradle-bushings-bmrbk001","title":"Street Version Differential Mount Bushing Kit \u003cbr\u003e 08-17 Chevy SS, Camaro, Pontiac G8","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce differential bushing deflection and minimize wheelhop with polyurethane differential bushings from BMR Suspension. Polyurethane is a synthetic polymer that has many properties that make it far superior to OEM rubber bushings. Polyurethane deflects far less that soft rubber, and it doesn't breakdown from exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment suspension bushings live in. BMR's polyurethane differential bushings (BK001) drastically increase differential stability over the factory rubber bushings. The bushings are molded from 68-durometer polyurethane, which reduced bushing deflection, while still absorbed road noise and engine vibrations. This allows you to increase performance without decreasing comfort.\n\nDesigned for any performance application, BMR Differential Bushings minimize power robbing differential movement by replacing the OE soft rubber bushings with high durometer 4-piece polyurethane bushings. The 68-durometer polyurethane bushings effectively minimize wheelhop without contributing to road noise or driveline vibrations. BMR differential bushings should be considered an absolute must for any type of high performance driving.\n\nBMR does not recommended these for vehicles with more than 450 RWHP. For applications above this power lever, BMR suggests the BK029 Differential Bushing Kit (95 durometer polyurethane) or BK026 Differential Bushing Kit (Delrin).\n\nBMR Suspension's BK001 Differential Bushing Kit is available in black. Installation time is about 4-5 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2010-2015 Chevrolet Camaro, 2008-2009 Pontiac G8, and 2014-2016 Chevy SS\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance applications up to 450rwhp\n\u003c\/li\u003e\u003cli\u003eReplaces the factory differential bushings\n\u003c\/li\u003e\u003cli\u003eManufactured from 68-durometer polyurethane\n\u003c\/li\u003e\u003cli\u003eReduces differential bushing deflection\n\u003c\/li\u003e\u003cli\u003eDecreases wheelhop\n\u003c\/li\u003e\u003cli\u003eIncreases throttle response\n\u003c\/li\u003e\u003cli\u003eIncreases traction\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2014-2017 Chevrolet SS\n\u003c\/li\u003e\u003cli\u003e2008-2009 Pontiac G8\n\u003c\/li\u003e\u003cli\u003e2010-2015 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109538783595,"sku":"BMR-BK001","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK001_large_3b1e3cfc-0f27-49d7-9146-c027ef55041f.jpg?v=1776391556"},{"product_id":"pontiac-g8-cradle-bushings-bmrbk002","title":"Rear Cradle Street Version Bushing Kit \u003cbr\u003e 08-09 Pontiac G8","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce cradle bushing deflection and minimize wheelhop with polyurethane cradle bushing inserts from BMR Suspension. Polyurethane is a synthetic polymer that has many properties that make it far superior to OEM rubber bushings. Polyurethane deflects far less that soft rubber, and it doesn't breakdown from exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment suspension bushings live in. BMR's polyurethane cradle bushing inserts (BK002) drastically increase cradle stability over the factory rubber bushings. The bushing inserts are molded from 95-durometer polyurethane, which reduces bushing deflection by filling the large voids in the factory bushings. This design reduces deflection and improves the overall feel of the car, while still absorbed road noise and engine vibrations. This allows you to increase performance without decreasing comfort.\n\nDesigned for street performance applications, BMR cradle insert bushings enhance the rear stability of the vehicle by minimizing cradle movement. This provides a much more stabilized and predictable platform that permits the suspension to more accurately do its job. The OE bushings are designed with air pockets in the soft rubber bushings. rather than replace the entire bushings, the BMR cradle insert bushings fill these voids, limiting the inherent movement of the factory design. There is no discernible increase in ride quality or noise level with this modification. \n\nBMR Suspension's BK002 Cradle Insert Busing Kit is available in black. Installation time is about 3-4 hours. Proudly made in the U.S.A.!\n\n***Does not work with Chevrolet Caprice PPV***\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2008-2009 Pontiac G8\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance applications\n\u003c\/li\u003e\u003cli\u003eFills the voids in the factory differential bushings\n\u003c\/li\u003e\u003cli\u003eManufactured from 95-durometer polyurethane\n\u003c\/li\u003e\u003cli\u003eReduces cradle bushing deflection\n\u003c\/li\u003e\u003cli\u003eDecreases wheelhop\n\u003c\/li\u003e\u003cli\u003eIncreases traction\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2008-2009 Pontiac G8\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109540454763,"sku":"BMR-BK002","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK002_large_dc658def-69f7-45a7-aee1-5dbc0b7dee59.jpg?v=1776391555"},{"product_id":"pontiac-g8-cradle-bushings-bmrbk003","title":"Street Version Rear Cradle Bushing Kit \u003cbr\u003e 08-09 Pontiac G8","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce cradle and differential bushing deflection and minimize wheelhop with Rear Cradle Bushing Kit from BMR Suspension. Polyurethane is a synthetic polymer that has many properties that make it far superior to the rubber used in OEM bushings. Polyurethane deflects far less that soft rubber, and it doesn't breakdown from exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment suspension bushings live in. BMR's polyurethane Rear Cradle\nBushing Kit (BK003) drastically increase cradle and differential stability over the factory rubber bushings. The cradle bushing inserts (BK002) are molded from 95-durometer polyurethane, which reduced bushing deflection by filling the large voids in the factory bushings. He polyurethane differential bushings (BK001) are molded from 68-durometer polyurethane, which reduced bushing deflection, while still absorbed road noise and engine vibrations. This design reduces deflection and improves the overall feel of the car, while still absorbed road noise and engine vibrations. This allows you to increase performance without decreasing comfort.\n\nDesigned for street performance applications, BMR cradle and differential bushings minimize wheel-hop and reduce rear cradle movement in your Pontiac G8. The kit includes bushings for the rear differential (BK001) and suspension cradle (BK002). The BMR Rear Cradle Bushing Kit (BK003) minimizes movement and provides additional rigidity in these critical areas, which ensures maximum power transmission to the wheels. This results in better handling and more consistent launches without significantly increasing noise, vibration, or harmonics. \n\nBMR Suspension's BK003 Busing Kit is available in black. Installation time is about 5-6 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2008-2009 Pontiac G8\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance applications\n\u003c\/li\u003e\u003cli\u003eReplaces the factory differential bushings\n\u003c\/li\u003e\u003cli\u003eFills the voids in the factory cradle bushings\n\u003c\/li\u003e\u003cli\u003eManufactured from 68-durometer (BK001) and 95-durometer (BK002) polyurethane\n\u003c\/li\u003e\u003cli\u003eReduces differential and cradle bushing deflection\n\u003c\/li\u003e\u003cli\u003eDecreases wheelhop\n\u003c\/li\u003e\u003cli\u003eIncreases throttle response\n\u003c\/li\u003e\u003cli\u003eIncreases traction\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2008-2009 Pontiac G8\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109540487531,"sku":"BMR-BK003","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK003_large_6be4b186-0d8a-4aca-86c1-d1ccd9217da5.jpg?v=1776391554"},{"product_id":"chevy-camaro-cradle-bushings-bmrbk016","title":"Rear Cradle Street Version Bushing Kit \u003cbr\u003e 10-15 Chevy Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce cradle bushing deflection and minimize wheelhop with polyurethane cradle bushing inserts from BMR Suspension. Polyurethane is a synthetic polymer that has many properties that make it far superior to OEM rubber bushings. Polyurethane deflects far less that soft rubber, and it doesn't breakdown from exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment suspension bushings live in. BMR's polyurethane cradle bushing inserts (BK016) drastically increase cradle stability over the factory rubber bushings. The bushing inserts are molded from 95-durometer polyurethane, which reduced bushing deflection by filling the large voids in the factory bushings. This design reduces deflection and improves the overall feel of the car, while still absorbed road noise and engine vibrations. This allows you to increase performance without decreasing comfort.\n\nDesigned for street performance applications, BMR cradle insert bushings enhance the rear stability of the vehicle by minimizing cradle movement. This provides a much more stabilized and predictable platform that permits the suspension to more accurately do its job. The OE bushings are designed with air pockets in the soft rubber bushings. rather than replace the entire bushings, the BMR cradle insert bushings fill these voids, limiting the inherent movement of the factory design. There is no discernible increase in ride quality or noise level with this modification. \n\nBMR Suspension's BK016 Rear Cradle Bushing Insert Kit is available in red. Installation time is about 4-5 hours. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2010-2011 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance applications\n\u003c\/li\u003e\u003cli\u003eFills the voids in the factory differential bushings\n\u003c\/li\u003e\u003cli\u003eManufactured from 95-durometer polyurethane\n\u003c\/li\u003e\u003cli\u003eReduces cradle bushing deflection\n\u003c\/li\u003e\u003cli\u003eDecreases wheelhop\n\u003c\/li\u003e\u003cli\u003eIncreases traction\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2010-2015 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109540684139,"sku":"BMR-BK016","price":339.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK016_large_30fc28e1-407f-41c0-afde-0de6897a7d71.jpg?v=1776391549"},{"product_id":"chevy-camaro-cradle-bushings-bmrbk020","title":"Street Version Rear Cradle Bushing Kit \u003cbr\u003e 10-15 Chevy Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce differential bushing deflection and minimize wheelhop with polyurethane differential bushings from BMR Suspension. Polyurethane is a synthetic polymer that has many properties that make it far superior to OEM rubber bushings. Polyurethane deflects far less that soft rubber, and it doesn't breakdown from exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment suspension bushings live in. BMR's polyurethane differential bushings (BK001) drastically increase differential stability over the factory rubber bushings. The bushings are molded from 68-durometer polyurethane, which reduced bushing deflection, while still absorbed road noise and engine vibrations. This allows you to increase performance without decreasing comfort.\n\nBMR's polyurethane cradle bushing inserts drastically increase cradle stability over the factory rubber bushings. The bushing inserts are molded from 95-durometer polyurethane, which reduced bushing deflection by filling the large voids in the factory bushings. This design reduces deflection and improves the overall feel of the car, while still absorbed road noise and engine vibrations. This allows you to increase performance without decreasing comfort.\n\nDesigned for street performance applications, BMR cradle insert bushings enhance the rear stability of the vehicle by minimizing cradle movement. This provides a much more stabilized and predictable platform that permits the suspension to more accurately do its job. The OE bushings are designed with air pockets in the soft rubber bushings. Rather than replace the entire bushings, the BMR cradle insert bushings fill these voids, limiting the inherent movement of the factory design. There is no discernible increase in ride quality or noise level with this modification. BMR Differential Bushings minimize power robbing differential movement by replacing the OE soft rubber bushings with high durometer 4-piece polyurethane bushings. The 68-durometer polyurethane bushings effectively minimize wheelhop without contributing to road noise or driveline vibrations. BMR differential bushings should be considered an absolute must for any type of high performance driving.\n\nBMR Suspension's BK020 Rear Cradle Bushing Kit comes in red and black with zinc-coated inner sleeves. Installation time is about 6-7 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2010-2011 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance applications up to 450rwhp\n\u003c\/li\u003e\u003cli\u003eReplaces the factory differential bushings\n\u003c\/li\u003e\u003cli\u003eManufactured from 68-durometer polyurethane\n\u003c\/li\u003e\u003cli\u003eReduces differential bushing deflection\n\u003c\/li\u003e\u003cli\u003eFills the voids in the factory differential bushings\n\u003c\/li\u003e\u003cli\u003eManufactured from 95-durometer polyurethane\n\u003c\/li\u003e\u003cli\u003eReduces cradle bushing deflection\n\u003c\/li\u003e\u003cli\u003eDecreases wheelhop\n\u003c\/li\u003e\u003cli\u003eIncreases throttle response\n\u003c\/li\u003e\u003cli\u003eIncreases traction\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2010-2015 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109540782443,"sku":"BMR-BK020","price":419.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK020_large_07820354-a6e5-4589-a35a-c6301b821d13.jpg?v=1776391547"},{"product_id":"chevy-ss-camaro-pontiac-g8-cradle-bushings-bmrbk026","title":"Race Version Differential Mount Bushing Kit \u003cbr\u003e 08-17 Chevy SS, Camaro, Pontiac G8","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eEliminate differential bushing deflection and minimize wheelhop with Delrin differential bushings from BMR Suspension. Delrin is a synthetic polymer that has many properties that make it far superior to OEM rubber bushings. Delrin is a solid polymer that eliminates deflection in comparison to soft rubber. BMR's Delrin differential bushings (BK026) drastically increase differential stability over the factory rubber bushings. The bushings are machined from solid Delrin, which eliminates bushing deflection. \n\nDesigned for extreme performance street, drag race, and handling applications, BMR Differential Bushings minimize power robbing differential movement by replacing the OE soft rubber bushings with solid Delrin bushings. The Delrin bushings effectively eliminates differential bushing deflection, which contributes to wheelhop. BMR differential bushings should be considered an absolute must for any type of high performance driving.\n\nBMR Suspension's BK026 Differential Bushing Kit is available in black. Installation time is about 4-5 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2010-2015 Chevrolet Camaro, 2008-2009 Pontiac G8, and 2014-2016 Chevy SS\n\u003c\/li\u003e\u003cli\u003eDesigned for extreme street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eReplaces the factory differential bushings\n\u003c\/li\u003e\u003cli\u003eManufactured from solid Delrin\n\u003c\/li\u003e\u003cli\u003eEliminates differential bushing deflection\n\u003c\/li\u003e\u003cli\u003eDecreases wheelhop\n\u003c\/li\u003e\u003cli\u003eIncreases throttle response\n\u003c\/li\u003e\u003cli\u003eIncreases traction\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2014-2017 Chevrolet SS\n\u003c\/li\u003e\u003cli\u003e2010-2015 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003e2008-2009 Pontiac G8\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109540913515,"sku":"BMR-BK026","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK026_large_1e7e2324-4ea8-4525-9521-9aff9b04ea09.jpg?v=1776391544"},{"product_id":"chevy-camaro-cradle-bushings-bmrbk030","title":"Pro Version Rear Cradle Bushing Kit \u003cbr\u003e 10-15 Chevy Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eEnhance the rear stability of your 2010 and newer Chevrolet Camaro by minimizing cradle movement with rear cradle and differential bushings. BMR Suspension's polyurethane Rear Cradle and Differential Bushings (BK024, BK029) drastically increase stability over the factory rubber bushings, which do little for performance. BMR designed its polyurethane cradle and differential bushings from 95-durometer polyurethane. This material offers huge reductions in deflection without excessive increases in NVH. Each bushing is manufactured to strict tolerances, using exact molds, which are designed by BMR. This allows for a perfect fit and increased performance for any driving style.\n\nBMR's Rear Cradle Bushings offer huge increases in performance over the stock rubber bushings. The OE bushings are designed with air pockets and are made from soft rubber. These voids, coupled with soft material produce excessive cradle movement during aggressive maneuvering. BMR's polyurethane cradle bushings replace the entire OE rubber bushing. BMR's Differential Bushings minimize differential movement by replacing the soft rubber OE bushings with 95-durometer 4-piece polyurethane bushings. This eliminates almost all cradle and differential movement, increases handling stability, and cornering ability, while giving you a much-improved overall feel in any performance driving situation. The reduction in cradle and differential movement also drastically reduces wheel hop, caused by excessive bushing deflection. \n\nDesigned for street performance, drag race, and handling applications, BMR Suspension BK030 Rear Cradle and Differential Bushings are the perfect solution for any Camaro being used for performance driving.\n\nBMR Suspension's BK030 Rear Cradle and Differential Busing Kit is available in red with zinc-coated hardware. Installation time is about 5-7 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2010-newer Chevrolet Camaros\n\u003c\/li\u003e\u003cli\u003eKit consists of BK024 and BK029\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003e95-durometer polyurethane rear cradle bushings\n\u003c\/li\u003e\u003cli\u003e95-durometer polyurethane differential bushings\n\u003c\/li\u003e\u003cli\u003eDecreased bushing deflection\n\u003c\/li\u003e\u003cli\u003eZinc-coated inner sleeves\n\u003c\/li\u003e\u003cli\u003e5-7 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2010-2015 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109540946283,"sku":"BMR-BK030","price":529.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK030_large_81a0862f-0690-4e11-9432-40f550579a4c.jpg?v=1776391543"},{"product_id":"chevy-camaro-cradle-bushings-bmrbk040","title":"Rear Cradle Street Version Bushing Kit \u003cbr\u003e 10-15 Chevy Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce cradle bushing deflection and minimize wheelhop with polyurethane cradle bushing inserts from BMR Suspension. Polyurethane is a synthetic polymer that has many properties that make it far superior to OEM rubber bushings. Polyurethane deflects far less that soft rubber, and it doesn't breakdown from exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment suspension bushings live in. BMR's polyurethane cradle bushing inserts (BK040) drastically increase cradle stability over the factory rubber bushings. The bushing inserts are molded from 95-durometer polyurethane, which reduced bushing deflection by filling the large voids in the factory bushings. This design reduces deflection and improves the overall feel of the car, while still absorbed road noise and engine vibrations. This allows you to increase performance without decreasing comfort.\n\nDesigned for street performance applications, BMR cradle insert bushings enhance the rear stability of the vehicle by minimizing cradle movement. This provides a much more stabilized and predictable platform that permits the suspension to more accurately do its job. The OE bushings are designed with air pockets in the soft rubber bushings. Rather than replace the entire bushings, the BMR cradle insert bushings fill these voids, limiting the inherent movement of the factory design. There is no discernible increase in ride quality or noise level with this modification. \n\nBMR Suspension's BK040 Rear Cradle Bushing Insert Kit is available in red. Installation time is about 4-5 hours. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2012-2015 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance applications\n\u003c\/li\u003e\u003cli\u003eFills the voids in the factory differential bushings\n\u003c\/li\u003e\u003cli\u003eManufactured from 95-durometer polyurethane\n\u003c\/li\u003e\u003cli\u003eReduces cradle bushing deflection\n\u003c\/li\u003e\u003cli\u003eDecreases wheelhop\n\u003c\/li\u003e\u003cli\u003eIncreases traction\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2010-2015 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109541044587,"sku":"BMR-BK040","price":339.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK040_large_bec74b15-8ed1-4302-82a5-9d6e86509165.jpg?v=1776391542"},{"product_id":"chevy-camaro-cradle-bushings-bmrbk041","title":"Street Version Rear Cradle Bushing Kit \u003cbr\u003e 10-15 Chevy Camaro","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce cradle bushing deflection and minimize wheelhop with polyurethane cradle bushing inserts from BMR Suspension. Polyurethane is a synthetic polymer that has many properties that make it far superior to OEM rubber bushings. Polyurethane deflects far less that soft rubber, and it doesn't breakdown from exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment suspension bushings live in. BMR's polyurethane cradle bushing inserts (BK040) drastically increase cradle stability over the factory rubber bushings. The bushing inserts are molded from 95-durometer polyurethane, which reduced bushing deflection by filling the large voids in the factory bushings. This design reduces deflection and improves the overall feel of the car, while still absorbed road noise and engine vibrations. This allows you to increase performance without decreasing comfort.\n\nReduce differential bushing deflection and minimize wheelhop with polyurethane differential bushings from BMR Suspension. Polyurethane is a synthetic polymer that has many properties that make it far superior to OEM rubber bushings. Polyurethane deflects far less that soft rubber, and it doesn't breakdown from exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment suspension bushings live in. BMR's polyurethane differential bushings (BK001) drastically increase differential stability over the factory rubber bushings. The bushings are molded from 68-durometer polyurethane, which reduced bushing deflection, while still absorbed road noise and engine vibrations. This allows you to increase performance without decreasing comfort.\n\nDesigned for street performance applications, BMR differential bushings and cradle bushing inserts enhance the rear stability of the vehicle by minimizing cradle and diff movement. This provides a much more stabilized and predictable platform that permits the suspension to more accurately do its job. The OE bushings are designed with air pockets in the soft rubber bushings. The reduction in deflection equates to more stability in the rear suspension and less wheelhop. All with little to no increase in NVH.\n\nBMR does not recommend this kit for vehicles with more than 450 RWHP. For applications above this power lever, BMR suggests the BK029 Differential Bushing Kit (95 durometer polyurethane) or BK026 Differential Bushing Kit (Delrin) in addition to the BK040.\n\nBMR Suspension's BK041 Differential Bushing Kit is available in red. Installation time is about 6-8 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2012-2015 Chevrolet Camaro\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance applications up to 450rwhp\n\u003c\/li\u003e\u003cli\u003eReplaces the factory differential bushings\n\u003c\/li\u003e\u003cli\u003eManufactured from 68-durometer polyurethane (BK001)\n\u003c\/li\u003e\u003cli\u003eReduces differential bushing deflection\n\u003c\/li\u003e\u003cli\u003eFills the voids in the factory differential bushings (BK040)\n\u003c\/li\u003e\u003cli\u003eManufactured from 95-durometer polyurethane\n\u003c\/li\u003e\u003cli\u003eReduces cradle bushing deflection\n\u003c\/li\u003e\u003cli\u003eDecreases wheelhop\n\u003c\/li\u003e\u003cli\u003eIncreases traction\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2010-2015 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109542650219,"sku":"BMR-BK041","price":419.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK041_large_8fb70cc8-8e50-4767-b95f-d7f90f977dd0.jpg?v=1776391541"},{"product_id":"oldsmobile-cutlass-pontiac-gto-chevry-chevelle-cradle-bushings-bmrbk043","title":"Differential Housing Mount Bushings \u003cbr\u003e 64-67 Oldsmobile Cutlass Pontiac GTO Chevry Chevelle","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce wheel hop, and increase the handling ability and traction of your 1964 GM A-body with differential housing bushings from BMR Suspension. These bushings are how the control arms directly connect to the differential, making them crucial to a proper functioning rear suspension system. Manufactured from 90-durometer polyurethane, BMR's bushings kits are far superior to dry rotted, worn out, soft rubber factory bushings. Each piece is made in a precision mold, ensuring every polyurethane bushing is the exact size for your A-body. BMR's zinc-coated steel inner sleeve resists corrosion for long life. \n\nBMR Suspension's BK043 kit is designed for street performance, autocross, drag race, and road race applications, or as a superior replacement bushing. These bushings are designed to stand up to the abuse of any performance environment, while still absorbing much of the vehicles NVH. The polyurethane bushings are internally fluted, which keeps grease in the bushing under high-load situations. The flutes also coat the inner sleeves and thrust surfaces ensuring flawless, quiet operation over the life of the bushing. BMR's BK043 differential bushings are engineered to handle the high compression loads of aggressive launches and hard acceleration, while offering plenty of articulation for great handling. These are the perfect upgrade for any enthusiast looking for increased suspension performance with acceptable NVH levels. When performance is a must, rely on BMR Suspension! \n\nBMR Suspension's BK043 Differential Busing Kit is available in red with zinc-coated hardware. Installation time is about 2-4 hours. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1964 A-body differentials only\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003e90-durometer polyurethane differential bushings\n\u003c\/li\u003e\u003cli\u003eDecreased bushing deflection\n\u003c\/li\u003e\u003cli\u003eInternally fluted bushings\n\u003c\/li\u003e\u003cli\u003eZinc-coated inner sleeves\n\u003c\/li\u003e\u003cli\u003eWorks with stock and aftermarket control arms\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1964-1967 Acadian Beaumont\n\u003c\/li\u003e\u003cli\u003e1964-1967 Buick Skylark\n\u003c\/li\u003e\u003cli\u003e1964-1967 Buick Special\n\u003c\/li\u003e\u003cli\u003e1964-1967 Buick Sport Wagon\n\u003c\/li\u003e\u003cli\u003e1964-1967 Chevrolet Chevelle\n\u003c\/li\u003e\u003cli\u003e1964-1967 Chevrolet El Camino\n\u003c\/li\u003e\u003cli\u003e1964-1967 Oldsmobile 442\n\u003c\/li\u003e\u003cli\u003e1964-1967 Oldsmobile Cutlass\n\u003c\/li\u003e\u003cli\u003e1964-1967 Oldsmobile F-85\n\u003c\/li\u003e\u003cli\u003e1964-1967 Oldsmobile Vista Cruiser\n\u003c\/li\u003e\u003cli\u003e1964-1967 Pontiac GTO\n\u003c\/li\u003e\u003cli\u003e1964-1967 Pontiac LeMans\n\u003c\/li\u003e\u003cli\u003e1964-1967 Pontiac Tempest\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109542748523,"sku":"BMR-BK043","price":56.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK043_large_c949f913-efa0-4064-a348-6fcf0f1fb3ee.jpg?v=1776391540"},{"product_id":"a-body-gm-g-body-cradle-bushings-bmrbk044","title":"Differential Housing Mount Bushings \u003cbr\u003e 65-72 A-body, 78-87 GM G-body","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce wheel hop, and increase the handling ability and traction of your 1965-1972 GM A-body or 1978-1987 GM G-body with differential housing bushings from BMR Suspension. These bushings are how the control arms directly connect to the differential, making them crucial to a proper functioning rear suspension system. Manufactured from 90-durometer polyurethane, BMR's bushings kits are far superior to dry rotted, worn out, soft rubber factory bushings. Each piece is made in a precision mold, ensuring every polyurethane bushing is the exact size for your A-body or G-body. BMR's zinc-coated steel inner sleeve resists corrosion for long life. \n\nBMR Suspension's BK044 kit is designed for street performance, autocross, drag race, and road race applications, or as a superior replacement bushing. These bushings are designed to stand up to the abuse of any performance environment, while still absorbing much of the vehicles NVH. The polyurethane bushings are internally fluted, which keeps grease in the bushing under high-load situations. The flutes also coat the inner sleeves and thrust surfaces ensuring flawless, quiet operation over the life of the bushing. BMR's BK043 differential bushings are engineered to handle the high compression loads of aggressive launches and hard acceleration, while offering plenty of articulation for great handling. These are the perfect upgrade for any enthusiast looking for increased suspension performance with acceptable NVH levels. When performance is a must, rely on BMR Suspension! \n\nBMR Suspension's BK044 Differential Busing Kit is available in red with zinc-coated hardware. Installation time is about 2-4 hours. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1965-1972 A-body and 1978-1987 GM G-body differentials\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003e90-durometer polyurethane differential bushings\n\u003c\/li\u003e\u003cli\u003eDecreased bushing deflection\n\u003c\/li\u003e\u003cli\u003eInternally fluted bushings\n\u003c\/li\u003e\u003cli\u003eZinc-coated inner sleeves\n\u003c\/li\u003e\u003cli\u003eWorks with stock and aftermarket control arms\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1978-1981 Buick Century\n\u003c\/li\u003e\u003cli\u003e1978-1987 Buick Regal\n\u003c\/li\u003e\u003cli\u003e1978-1987 Chevrolet El Camino\n\u003c\/li\u003e\u003cli\u003e1978-1983 Chevrolet Malibu\n\u003c\/li\u003e\u003cli\u003e1978-1988 Chevrolet Monte Carlo\n\u003c\/li\u003e\u003cli\u003e1978-1987 GMC Caballero\n\u003c\/li\u003e\u003cli\u003e1978-1980 Oldsmobile 442\n\u003c\/li\u003e\u003cli\u003e1978-1983 Oldsmobile Cutlass Cruiser\n\u003c\/li\u003e\u003cli\u003e1978-1987 Oldsmobile Cutlass Supreme\n\u003c\/li\u003e\u003cli\u003e1978-1986 Pontiac Bonneville\n\u003c\/li\u003e\u003cli\u003e1978-1980 Pontiac Grand Am\n\u003c\/li\u003e\u003cli\u003e1982-1987 Pontiac Grand LeMans\n\u003c\/li\u003e\u003cli\u003e1978-1987 Pontiac Grand Prix\n\u003c\/li\u003e\u003cli\u003e1978-1981 Pontiac LeMans\n\u003c\/li\u003e\u003cli\u003e1964-1969 Acadian Beaumont\n\u003c\/li\u003e\u003cli\u003e1964-1972 Buick Skylark\n\u003c\/li\u003e\u003cli\u003e1964-1967 Buick Special\n\u003c\/li\u003e\u003cli\u003e1968-1969 Buick Special Deluxe\n\u003c\/li\u003e\u003cli\u003e1964-1972 Buick Sport Wagon\n\u003c\/li\u003e\u003cli\u003e1964-1972 Chevrolet Chevelle\n\u003c\/li\u003e\u003cli\u003e1964-1972 Chevrolet El Camino\n\u003c\/li\u003e\u003cli\u003e1971-1972 GMC Sprint\n\u003c\/li\u003e\u003cli\u003e1964-1972 Oldsmobile 442\n\u003c\/li\u003e\u003cli\u003e1964-1972 Oldsmobile Cutlass\n\u003c\/li\u003e\u003cli\u003e1966-1972 Oldsmobile Cutlass Supreme\n\u003c\/li\u003e\u003cli\u003e1964-1972 Oldsmobile F-85\n\u003c\/li\u003e\u003cli\u003e1964-1972 Oldsmobile Vista Cruiser\n\u003c\/li\u003e\u003cli\u003e1964-1972 Pontiac GTO\n\u003c\/li\u003e\u003cli\u003e1964-1972 Pontiac LeMans\n\u003c\/li\u003e\u003cli\u003e1964-1970 Pontiac Tempest\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109542781291,"sku":"BMR-BK044","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK044_large_223b9c93-c0c7-4f61-947e-71ffec7be289.jpg?v=1776391538"},{"product_id":"chevy-caprice-impala-cradle-bushings-bmrbk045","title":"Differential Housing Mount Bushings \u003cbr\u003e 91-96 Chevy Caprice, 94-96 Impala","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce wheel hop, and increase the handling ability and traction of your 1991-1996 GM B-body with differential housing bushings from BMR Suspension. These bushings are how the control arms directly connect to the differential, making them crucial to a proper functioning rear suspension system. Manufactured from 90-durometer polyurethane, BMR's bushings kits are far superior to dry rotted, worn out, soft rubber factory bushings. Each piece is made in a precision mold, ensuring every polyurethane bushing is the exact size for your B-body. BMR's zinc-coated steel inner sleeve resists corrosion for long life. \n\nBMR Suspension's BK045 kit is designed for street performance, autocross, drag race, and road race applications, or as a superior replacement bushing. These bushings are designed to stand up to the abuse of any performance environment, while still absorbing much of the vehicles NVH. The polyurethane bushings are internally fluted, which keeps grease in the bushing under high-load situations. The flutes also coat the inner sleeves and thrust surfaces ensuring flawless, quiet operation over the life of the bushing. BMR's BK043 differential bushings are engineered to handle the high compression loads of aggressive launches and hard acceleration, while offering plenty of articulation for great handling. These are the perfect upgrade for any enthusiast looking for increased suspension performance with acceptable NVH levels. When performance is a must, rely on BMR Suspension! \n\nBMR Suspension's BK045 Differential Busing Kit is available in red with zinc-coated hardware. Installation time is about 2-4 hours. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 1978-1996 GM B-body differentials\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003e90-durometer polyurethane differential bushings\n\u003c\/li\u003e\u003cli\u003eDecreased bushing deflection\n\u003c\/li\u003e\u003cli\u003eInternally fluted bushings\n\u003c\/li\u003e\u003cli\u003eZinc-coated inner sleeves\n\u003c\/li\u003e\u003cli\u003eWorks with stock and aftermarket control arms\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e1991-1996 Chevrolet Caprice\n\u003c\/li\u003e\u003cli\u003e1994-1996 Chevrolet Impala SS\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109542814059,"sku":"BMR-BK045","price":89.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK045_large_2e5396da-91d4-4191-988d-dd295f009912.jpg?v=1776391537"},{"product_id":"chevy-ss-camaro-pontiac-g8-cradle-bushings-bmrbk046","title":"Differential Mount Bushing Kit \u003cbr\u003e 08-17 Chevy SS, Camaro, Pontiac G8","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eBMR BK046 Differential Bushing Kit minimizes power robbing differential movement by replacing the OE soft rubber bushings with four high durometer front polyurethane bushings and 2 rear Delrin bushings. The combination of 95 durometer polyurethane bushings and Delrin effectively eliminates wheelhop with minimal contribution to road noise or driveline vibrations. BMR differential bushings should be considered an absolute must for any type of high horsepower application.\n\nReduce differential bushing deflection and minimize wheelhop with polyurethane\/Delrin differential bushings from BMR Suspension. Polyurethane is a synthetic polymer that has many properties that make it far superior to OEM rubber bushings. Polyurethane deflects far less that soft rubber, and it doesn't breakdown from exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment suspension bushings live in. Delrin is solid, self-lubricating polymer that eliminates bushing deflection over soft factory bushings. BMR's polyurethane\/Delrin differential bushings (BK046) drastically increase differential stability over the factory rubber bushings. The bushings are molded from 95-durometer polyurethane and machined from Delrin, which reduced bushing deflection on the front mount and eliminates deflection on the rear mount, while still absorbed road noise and engine vibrations. This allows you to increase performance without decreasing comfort.\n\nDesigned for street performance, drag race, and handling application, BMR Differential Bushings minimize power robbing differential movement by replacing the OE soft rubber bushings with high-durometer 4-piece polyurethane bushings(front) and 2-piece Delrin bushings (rear). The bushings effectively minimize wheelhop without contributing to road noise or driveline vibrations. BMR differential bushings should be considered an absolute must for any type of high performance driving.\n\nBMR Suspension's BK046 Differential Bushing Kit is available in red. Installation time is about 4-5 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2010-2015 Chevrolet Camaro, 2008-2009 Pontiac G8, and 2014-2016 Chevy SS\n\u003c\/li\u003e\u003cli\u003eDesigned for high-performance street, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eReplaces the factory differential bushings\n\u003c\/li\u003e\u003cli\u003eManufactured from 95-durometer polyurethane (front)\n\u003c\/li\u003e\u003cli\u003eMachined from solid Delrin (rear)\n\u003c\/li\u003e\u003cli\u003eReduces differential bushing deflection\n\u003c\/li\u003e\u003cli\u003eDecreases wheelhop\n\u003c\/li\u003e\u003cli\u003eIncreases throttle response\n\u003c\/li\u003e\u003cli\u003eIncreases traction\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2014-2017 Chevrolet SS\n\u003c\/li\u003e\u003cli\u003e2008-2009 Pontiac G8\n\u003c\/li\u003e\u003cli\u003e2010-2015 Chevrolet Camaro\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109542846827,"sku":"BMR-BK046","price":129.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK046_large_34a2a328-bace-4f4d-b004-2835b04ac50d.jpg?v=1776391536"},{"product_id":"ford-mustang-cradle-bushings-bmrbk079","title":"8.8in Differential Bearing Kit Spherical Bearings \u003cbr\u003e 05-14 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eMinimize wheel hop and enhance the rear stability of your 2005-2014 Mustang with a Rear Upper Control Arm Bearing Kit from BMR Suspension! Stock bushings are made from soft rubber with air pockets that produce excessive upper control arm movement during normal and aggressive driving. BMR¡¯s Bearing Kit (BK079) minimizes bushing deflection and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR Suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2005-2014 S197 Mustangs\n\u003c\/li\u003e\u003cli\u003eHeavy-duty stainless steel bearing cup\n\u003c\/li\u003e\u003cli\u003ePremium bearing\n\u003c\/li\u003e\u003cli\u003eReplaces the factory rear upper control arm bushing\n\u003c\/li\u003e\u003cli\u003eMinimizes rear upper control arm bushing deflection\n\u003c\/li\u003e\u003cli\u003eDecreases wheel hop\n\u003c\/li\u003e\u003cli\u003eIncreases throttle response and traction\n\u003c\/li\u003e\u003cli\u003eAvailable bare for a durable finish\n\u003c\/li\u003e\u003cli\u003e2-3 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2005-2014 Ford Mustang\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109542879595,"sku":"BMR-BK079","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/BK079_large_e9779768-064e-45cf-8bcb-552cd5bc9c67.jpg?v=1776391535"},{"product_id":"dodge-challenger-charger-cradle-bushings-bmrdmb110","title":"Differential Lockout Bushing Kit \u003cbr\u003e 08-23 Dodge Challenger Charger","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce wheel hop and enhance the rear stability of your 2015-2023 Charger and Challenger with a Differential Bushing Lockout Kit from BMR Suspension! OE bushing are made from soft rubber with air pockets, producing excessive differential movement during normal and aggressive driving. BMR¡¯s Differential Bushing Lockout Kit (DMB110) drastically decreases differential bushing deflection and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR Suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2023 Chargers\n\u003c\/li\u003e\u003cli\u003eFits 2015-2023 Challengers\n\u003c\/li\u003e\u003cli\u003eManufactured from heavy-duty 6061 aluminum\n\u003c\/li\u003e\u003cli\u003eCNC-machined to exact tolerances\n\u003c\/li\u003e\u003cli\u003eInstalls over the factory differential bushings\n\u003c\/li\u003e\u003cli\u003eReduces differential movement\n\u003c\/li\u003e\u003cli\u003eDecreases wheel hop\n\u003c\/li\u003e\u003cli\u003eIncreases handling stability and feel\n\u003c\/li\u003e\u003cli\u003eAvailable black anodized for a durable finish\n\u003c\/li\u003e\u003cli\u003e3-4 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2011-2023 Dodge Charger\n\u003c\/li\u003e\u003cli\u003e2008-2023 Dodge Challenger\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109544714603,"sku":"BMR-DMB110","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/DMB110_large_e2e634f6-1a5e-4965-846f-4d2e2e2b145f.jpg?v=1776391514"},{"product_id":"dodge-challenger-charger-cradle-bushings-bmrdmb111","title":"Differential Lockout Bushing Kit \u003cbr\u003e 08-23 Dodge Challenger Charger","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce wheel hop and enhance the rear stability of your 2015-2023 Charger and Challenger with a Polyurethane Differential Mount Bushing Kit from BMR Suspension! OE bushings are made from soft rubber with air pockets, producing excessive differential movement during normal and aggressive driving. BMR¡¯s Polyurethane Differential Bushing Kit (DMB111) decreases differential bushing deflection and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR Suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2023 Chargers\n\u003c\/li\u003e\u003cli\u003eFits 2015-2023 Challengers\n\u003c\/li\u003e\u003cli\u003eManufactured from 95-durometer polyurethane\n\u003c\/li\u003e\u003cli\u003eCNC-machined to exact tolerances\n\u003c\/li\u003e\u003cli\u003eGreatly reduces differential movement\n\u003c\/li\u003e\u003cli\u003eDecreases wheel hop\n\u003c\/li\u003e\u003cli\u003eIncreases handling stability and feel\n\u003c\/li\u003e\u003cli\u003eMinimizes changes in NVH\n\u003c\/li\u003e\u003cli\u003eAvailable in red for a durable finish\n\u003c\/li\u003e\u003cli\u003e4-5 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2011-2023 Dodge Charger\n\u003c\/li\u003e\u003cli\u003e2008-2023 Dodge Challenger\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109544747371,"sku":"BMR-DMB111","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/DMB111_large_621264ce-57c7-46ed-9499-d4ad6abf2e21.jpg?v=1776391513"},{"product_id":"dodge-challenger-charger-cradle-bushings-bmrdmb112","title":"Aluminum Differential Mount Housing Bushing Kit \u003cbr\u003e 08-23 Dodge Challenger Charger","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce wheel hop and enhance the rear stability of your 2015-2023 Charger and Challenger with a Billet Aluminum Differential Mount Bushing Kit from BMR Suspension! OE bushings are made from soft rubber with air pockets, producing excessive differential movement during normal and aggressive driving. BMR¡¯s Billet Aluminum Differential Bushing Kit (DMB112) eliminates differential bushing deflection and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR Suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2015-2023 Chargers\n\u003c\/li\u003e\u003cli\u003eFits 2015-2023 Challengers\n\u003c\/li\u003e\u003cli\u003eManufactured from heavy-duty 6061 aluminum\n\u003c\/li\u003e\u003cli\u003eCNC-machined to exact tolerances\n\u003c\/li\u003e\u003cli\u003eEliminates differential movement and pinion rise\n\u003c\/li\u003e\u003cli\u003eMinimizes wheel hop\n\u003c\/li\u003e\u003cli\u003eIncreases handling stability and feel\n\u003c\/li\u003e\u003cli\u003eDesigned for max-effort racing environments\n\u003c\/li\u003e\u003cli\u003eAvailable black anodized for a durable finish\n\u003c\/li\u003e\u003cli\u003e4-5 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2011-2023 Dodge Charger\n\u003c\/li\u003e\u003cli\u003e2008-2023 Dodge Challenger\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109544780139,"sku":"BMR-DMB112","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/DMB112_large_c4c4b33f-e3c9-4cae-b617-0bca64221703.jpg?v=1776391512"},{"product_id":"ford-mustang-cradle-bushings-bmren001","title":"Differential bushing kit \u003cbr\u003e 05-14 Ford Mustang","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eReduce wheel hop, and increase the handling ability and traction of your 2005-2014 S197 Mustang with differential housing bushings from BMR Suspension. These bushing is how the upper control arm directly connects to the differential, making it crucial to a proper functioning rear suspension system. Manufactured from multiple durometer polyurethanes, BMR's EN001 bushing kit can stand up to high compression loads, while remaining soft enough for suspension articulation. Each piece is made in a precision mold, ensuring every polyurethane bushing fits your S197 perfectly. BMR's zinc-coated steel inner sleeve resists corrosion for long life. \n\nBMR Suspension's EN001 kit is designed for street performance, autocross, drag race, and road race applications, or as a superior replacement bushing. This bushing is designed to stand up to the abuse of any performance environment, while still absorbing much of the vehicles NVH. The polyurethane bushing is internally fluted, which keeps grease in the bushing under high-load situations. The flutes also coat the inner sleeves and thrust surfaces ensuring flawless, quiet operation over the life of the bushing. BMR's EN001 differential bushing is engineered to handle the high compression loads of aggressive launches and hard acceleration, while offering plenty of articulation for great handling. These are the perfect upgrade for any enthusiast looking for increased suspension performance with acceptable NVH levels. When performance is a must, rely on BMR Suspension! \n\n***NOTE: requires use of existing bushing shell.***\n\nBMR Suspension's EN001 Differential Busing Kit is available in red with zinc-coated hardware. Installation time is about 2-4 hours. Proudly made in the U.S.A.!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2005-2014 S197 Mustang\n\u003c\/li\u003e\u003cli\u003eDesigned for street performance, drag race, and handling applications\n\u003c\/li\u003e\u003cli\u003eMulti-durometer polyurethane differential bushing\n\u003c\/li\u003e\u003cli\u003eDecreased bushing deflection\n\u003c\/li\u003e\u003cli\u003eInternally fluted bushings\n\u003c\/li\u003e\u003cli\u003eZinc-coated inner sleeves\n\u003c\/li\u003e\u003cli\u003eWorks with stock and aftermarket control arms\n\u003c\/li\u003e\u003cli\u003eProudly designed in the U.S.A.\n\u003c\/li\u003e\u003cli\u003eProudly made in the U.S.A.\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2005-2014 Ford Mustang\n\u003c\/li\u003e\u003cli\u003e2007-2014 Ford Mustang Shelby GT500\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109545501035,"sku":"BMR-EN001","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/EN001_large_06d8e193-115b-4b14-8edd-f2374a3b2d24.jpg?v=1776391498"},{"product_id":"dodge-chargerchallenger-cradle-bushings-bmrscb111","title":"Rear Cradle Lockout Bushing Kit \u003cbr\u003e 06-23 Dodge Charger, 08-23 Challenger","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eSignificantly reduce rear cradle movement in your Dodge Charger and Challenger with a Polyurethane Rear Cradle Bushing Kit from BMR Suspension! OE bushings are designed with air pockets and are made from soft rubber, producing excessive differential movement during normal and aggressive driving. BMR¡¯s Polyurethane Rear Cradle Bushing Kit (SCB111) reduces bushing deflection and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR Suspension!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eFits 2006-2023 Chargers\n\u003c\/li\u003e\u003cli\u003eFits 2008-2023 Challengers\n\u003c\/li\u003e\u003cli\u003e95-durometer polyurethane cradle bushings\n\u003c\/li\u003e\u003cli\u003eOversized 6061-T6 billet aluminum inner bushing sleeves\n\u003c\/li\u003e\u003cli\u003eZinc-coated hardware\n\u003c\/li\u003e\u003cli\u003eReduces bushing deflection and cradle movement\n\u003c\/li\u003e\u003cli\u003eGreatly reduces wheel hop\n\u003c\/li\u003e\u003cli\u003eImproves the rigidity and stability of the chassis\n\u003c\/li\u003e\u003cli\u003eIncreases handling stability\n\u003c\/li\u003e\u003cli\u003eAvailable in red for long-lasting good looks\n\u003c\/li\u003e\u003cli\u003e3-4 hour installation time\n\u003c\/li\u003e\u003cli\u003eProudly designed in the USA!\n\u003c\/li\u003e\u003cli\u003eProudly made in the USA!\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eBMR Diff Bushing Kits\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible With:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003e2006-2023 Dodge Charger\n\u003c\/li\u003e\u003cli\u003e2008-2023 Dodge Challenger\u003c\/li\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":53109547958635,"sku":"BMR-SCB111","price":239.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/SCB111_large_7d1a5c2f-3998-4073-bf43-06d1afcfcb20.jpg?v=1776391469"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/collections\/BK062.jpg?v=1776307869","url":"https:\/\/caautoparts.com\/collections\/bmr-suspension-cradle-bushings.oembed","provider":"CA Auto Parts","version":"1.0","type":"link"}