{"title":"Comp Cams Engine Valves \u0026 Parts","description":null,"products":[{"product_id":"engine-valves-parts-cca600-1","title":"Hardened Steel Street Lock \u003cbr\u003e 7 Degree, 5\/16in, Single Groove","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 1 Pair of hardened Steel Street Locks: 1 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 5\/16\" Stem Size. This hardened Steel, single groove Steel Street Lock with 7\u0026amp;deg\n\u003cbr\u003elock angle and 5\/16\" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 5\/16 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885943943531,"sku":"CCA-600-1","price":21.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-600-1-1.jpg?v=1770606736"},{"product_id":"engine-valves-parts-cca601-1","title":"Hardened Steel Street Lock \u003cbr\u003e 7 Degree, 11\/32in, Single Groove","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 1 Pair of hardened Steel Street Locks: 1 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 11\/32\" Stem Size. This hardened Steel, single groove Steel Street Lock with 7\u0026amp;deg\n\u003cbr\u003elock angle and 11\/32\" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885943976299,"sku":"CCA-601-1","price":21.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-601-1-1.jpg?v=1770606774"},{"product_id":"engine-valves-parts-cca602-1","title":"Hardened Steel Street Lock \u003cbr\u003e for Chryslere","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 1 Pair of Chrysler hardened Steel Street Locks: 2 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 3\/8\" Stem SizeThese hardened Steel, Chrysler 2 groove Steel Street Locks with 7\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size are a perfect replacement lock for stock engine rebuilds. They are recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: 2\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885944009067,"sku":"CCA-602-1","price":21.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-602-1-1.jpg?v=1770606806"},{"product_id":"engine-valves-parts-cca604-1","title":"Hardened Steel Street Lock for Chrysler \u003cbr\u003e 7 Degree, 3\/8in, 4 Groove","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 1 Pair of Chrysler hardened Steel Street Locks: 4 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 3\/8\" Stem SizeThese hardened Steel, Chrysler 4 groove Steel Street Locks with 7\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size are a perfect replacement lock for stock engine rebuilds. They are recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: 4\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885944074603,"sku":"CCA-604-1","price":21.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-604-1-1.jpg?v=1770606839"},{"product_id":"engine-valves-parts-cca628-1","title":"Machined Steel Single Groove Race Lock \u003cbr\u003e 7 Degree, 5\/16in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 1 Pair of Machined Steel Race Locks: 1 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 5\/16\" StemThese single groove Machined Steel Street Locks with 7\u0026amp;deg\n\u003cbr\u003elock angle and 5\/16\" valve stem size are perfect locks for many Applications.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Race Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Machined Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 5\/16 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885944140139,"sku":"CCA-628-1","price":21.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-628-1-1.jpg?v=1770607197"},{"product_id":"engine-valves-parts-cca648-1","title":"Machined Steel Single Groove Race Lock \u003cbr\u003e 7 Degree, 11\/32in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 1 Pair of Machined Steel Race Locks: 1 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 11\/32\" StemThese single groove Machined Steel Street Locks with 7\u0026amp;deg\n\u003cbr\u003elock angle and 11\/32\" valve stem size are perfect locks for many Applications.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Race Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Machined Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885944172907,"sku":"CCA-648-1","price":21.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-648-1-1.jpg?v=1770607302"},{"product_id":"engine-valves-parts-cca603-1","title":"Hardened Steel Single Groove Street Lock \u003cbr\u003e 7 Degree, 3\/8in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 1 Pair of hardened Steel Street Locks: 1 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 3\/8\" Stem Size. This hardened Steel, single groove Steel Street Lock with 7\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885944205675,"sku":"CCA-603-1","price":21.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-603-1-1.jpg?v=1770606827"},{"product_id":"engine-valves-parts-cca605-1","title":"7 Degree, 11\/32in 4 Groove Street Lock \u003cbr\u003e for Ford 351C","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 1 Pair of hardened Steel Street Locks: 4 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 11\/32\" Stem SizeThese hardened Steel, 4 groove Steel Street Locks with 7\u0026amp;deg\n\u003cbr\u003elock angle and 11\/32\" valve stem size are a perfect replacement lock for stock engine rebuilds. They are recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: 4\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885944238443,"sku":"CCA-605-1","price":21.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-605-1-1.jpg?v=1770606864"},{"product_id":"engine-valves-parts-cca641-1","title":"Machined Steel Single Groove Race Lock \u003cbr\u003e 7 Degree, 3\/8in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis single groove Machined Steel Street Lock with 7\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size is the perfect replacement lock for street Applications.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Race Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Machined Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885944271211,"sku":"CCA-641-1","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-641-1-1.jpg?v=1770607278"},{"product_id":"engine-valves-parts-cca614-1","title":"Single Groove Lock \u003cbr\u003e 10 Degree, 11\/32in + 0.050in Height","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Steel Super Lock with +.050 install height features a 10\u0026amp;deg\n\u003cbr\u003elock angle and 11\/32\" valve stem size. It is recommended for all Race Applications because Super Locks have a wider angle 10\u0026amp;deg\n\u003cbr\u003ethat better distributes the ever increasing valve spring loads over the retainer than typical 7\u0026amp;deg\n\u003cbr\u003elocks. Precision-machined out of super-tough, fatigue-resistant Metal alloy, Super Locks fit any COMP Cams 10\u0026amp;deg\n\u003cbr\u003eretainer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0.05 IN\n\u003c\/li\u003e\u003cli\u003eLash Cap Recess: No\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885944697195,"sku":"CCA-614-1","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-614-1-1.jpg?v=1770607033"},{"product_id":"engine-valves-parts-cca617-1","title":"Single Groove Lock \u003cbr\u003e 10 Degree, 0.310in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Steel Super Lock without a lash cap recess features a 10\u0026amp;deg\n\u003cbr\u003elock angle and .310\" valve stem size, and is recommended for all Race Applications.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0 IN\n\u003c\/li\u003e\u003cli\u003eLash Cap Recess: No\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 0.31 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885944729963,"sku":"CCA-617-1","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-617-1-1.jpg?v=1770607062"},{"product_id":"engine-valves-parts-cca618-1","title":"Single Groove Lock w\/ Lash Cap Recess \u003cbr\u003e 10 Degree, 0.310in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Steel Super Lock featuring a lash cap recess, 10\u0026amp;deg\n\u003cbr\u003elock angle and .310\" valve stem size is recommended for all Race Applications.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0 IN\n\u003c\/li\u003e\u003cli\u003eLash Cap Recess: Yes\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 0.31 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885944762731,"sku":"CCA-618-1","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-618-1-1.jpg?v=1770607071"},{"product_id":"engine-valves-parts-cca609-1","title":"Single Groove Lock w\/ Lash Cap Recess \u003cbr\u003e 10 Degree, 3\/8in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Steel Super Lock with .050 install height features a lash cap recess, 10\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size. It is recommended for all Race Applications because Super Locks have a wider angle 10\u0026amp;deg\n\u003cbr\u003ethat better distributes the ever increasing valve spring loads over the retainer than typical 7\u0026amp;deg\n\u003cbr\u003elocks. Precision-machined out of super-tough, fatigue-resistant Metal alloy, Super Locks fit any COMP Cams 10\u0026amp;deg\n\u003cbr\u003eretainer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: -0.05 IN\n\u003c\/li\u003e\u003cli\u003eLash Cap Recess: Yes\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885944861035,"sku":"CCA-609-1","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-609-1-1.jpg?v=1770606932"},{"product_id":"engine-valves-parts-cca630-1","title":"Single Groove Lock w\/ Lash Cap Recess \u003cbr\u003e 10 Degree, 11\/32in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Steel Super Lock with .050 install height features a lash cap recess, 10\u0026amp;deg\n\u003cbr\u003elock angle and .11\/32\" valve stem size. It is recommended for all Race Applications because Super Locks have a wider angle 10\u0026amp;deg\n\u003cbr\u003ethat better distributes the ever increasing valve spring loads over the retainer than typical 7\u0026amp;deg\n\u003cbr\u003elocks. Precision-machined out of super-tough, fatigue-resistant Metal alloy, Super Locks fit any COMP Cams 10\u0026amp;deg\n\u003cbr\u003eretainer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: -0.05 IN\n\u003c\/li\u003e\u003cli\u003eLash Cap Recess: Yes\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885944893803,"sku":"CCA-630-1","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-630-1-1_e7746e18-c20e-4bf6-afdb-43725333aa0e.jpg?v=1770686437"},{"product_id":"engine-valves-parts-cca610-1","title":"Single Groove Lock w\/ Lash Cap Recess \u003cbr\u003e 10 Degree, 0.308in\/5\/16in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Steel Super Lock featuring a lash cap recess, 10\u0026amp;deg\n\u003cbr\u003elock angle and .308\"\/5\/16\" valve stem size is recommended for all Race Applications.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0 IN\n\u003c\/li\u003e\u003cli\u003eLash Cap Recess: Yes\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 0.308\/5\/16 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885945057643,"sku":"CCA-610-1","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-610-1-1.jpg?v=1770606960"},{"product_id":"engine-valves-parts-cca611-1","title":"Single Groove Lock w\/ Lash Cap Recess \u003cbr\u003e 10 Degree, 11\/32in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Steel Super Lock featuring a lash cap recess, 10\u0026amp;deg\n\u003cbr\u003elock angle and 11\/32\" valve stem size is recommended for all Race Applications.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0 IN\n\u003c\/li\u003e\u003cli\u003eLash Cap Recess: Yes\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885945090411,"sku":"CCA-611-1","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-611-1-1.jpg?v=1770607002"},{"product_id":"engine-valves-parts-cca612-1","title":"Single Groove Lock w\/ Lash Cap Recess \u003cbr\u003e 10 Degree, 3\/8in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Steel Super Lock with lash cap recess features a 10\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size. It is recommended for all Race Applications because Super Locks have a wider angle 10\u0026amp;deg\n\u003cbr\u003ethat better distributes the ever increasing valve spring loads over the retainer than typical 7\u0026amp;deg\n\u003cbr\u003elocks. Precision-machined out of super-tough, fatigue-resistant Metal alloy, Super Locks fit any COMP Cams 10\u0026amp;deg\n\u003cbr\u003eretainer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0 IN\n\u003c\/li\u003e\u003cli\u003eLash Cap Recess: Yes\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885945123179,"sku":"CCA-612-1","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-612-1-1.jpg?v=1770607013"},{"product_id":"engine-valves-parts-cca613-1","title":"Single Groove Lock \u003cbr\u003e 10 Degree, 11\/32in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Steel Super Lock without a lash cap recess features a 10\u0026amp;deg\n\u003cbr\u003elock angle and 11\/32\" valve stem size, and is recommended for all Race Applications.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0 IN\n\u003c\/li\u003e\u003cli\u003eLash Cap Recess: No\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885945155947,"sku":"CCA-613-1","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-613-1-1.jpg?v=1770607024"},{"product_id":"engine-valves-parts-cca616-1","title":"Single Groove Lock \u003cbr\u003e 10 Degree, 3\/8in, +0.050in Height","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThise Steel Super Lock with +.050 install height features a 10\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size. It is recommended for all Race Applications because Super Locks have a wider angle 10\u0026amp;deg\n\u003cbr\u003ethat better distributes the ever increasing valve spring loads over the retainer than typical 7\u0026amp;deg\n\u003cbr\u003elocks. Precision-machined out of super-tough, fatigue-resistant Metal alloy, Super Locks fit any COMP Cams 10\u0026amp;deg\n\u003cbr\u003eretainer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0.05 IN\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885945221483,"sku":"CCA-616-1","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-616-1-1.jpg?v=1770607047"},{"product_id":"engine-valves-parts-cca623-1","title":"Machined Steel Single-Groove Race Lock \u003cbr\u003e 7 Degree, 8mm","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eMachined Steel 7 Degree, 8mm, Single Groove Race Lock - Single\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Race Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Machined Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 8 MM\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885945254251,"sku":"CCA-623-1","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-623-1-1.jpg?v=1770607154"},{"product_id":"engine-valves-parts-cca629-1","title":"Machined Steel Single-Groove Race Lock \u003cbr\u003e 7 Degree, 5mm","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eMachined Steel 7\u0026amp;deg\n\u003cbr\u003e, 5mm, Single Groove Race Lock - Single\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Race Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Machined Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 5.5 MM\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885945287019,"sku":"CCA-629-1","price":21.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-629-1-1.jpg?v=1770607204"},{"product_id":"engine-valves-parts-cca632-1","title":"10 Degree, 8mm, Single Groove Lock \u003cbr\u003e for LS1\/LS6 Bead Lock","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis LS1\/LS6 bead lock Steel Super Lock features a 10\u0026amp;deg\n\u003cbr\u003elock angle and 8mm valve stem size. It is recommended for all Race Applications because Super Locks have a wider angle 10\u0026amp;deg\n\u003cbr\u003ethat better distributes the ever increasing valve spring loads over the retainer than typical 7\u0026amp;deg\n\u003cbr\u003elocks. Precision-machined out of super-tough, fatigue-resistant Metal alloy, Super Locks fit any COMP Cams 10\u0026amp;deg\n\u003cbr\u003eretainer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0 IN\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 8 MM\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885945352555,"sku":"CCA-632-1","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-632-1-1.jpg?v=1770607236"},{"product_id":"engine-valves-parts-cca624-1","title":"10 Degree, 11\/32in, 4 Groove Lock \u003cbr\u003e for Ford","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Ford four groove Steel Super Lock features a 10\u0026amp;deg\n\u003cbr\u003elock angle and 11\/32\" valve stem size. It is recommended for all Race Applications because Super Locks have a wider angle 10\u0026amp;deg\n\u003cbr\u003ethat better distributes the ever increasing valve spring loads over the retainer than typical 7\u0026amp;deg\n\u003cbr\u003elocks. Precision-machined out of super-tough, fatigue-resistant Metal alloy, Super Locks fit any COMP Cams 10\u0026amp;deg\n\u003cbr\u003eretainer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0 IN\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885945450859,"sku":"CCA-624-1","price":23.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-624-1-1.jpg?v=1770607163"},{"product_id":"engine-valves-parts-cca625-1","title":"10 Degree, 3\/8in, 2 Groove Lock \u003cbr\u003e for Chrysler","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Chrysler two groove Steel Super Locks features a 10\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size. It is recommended for all Race Applications because Super Locks have a wider angle 10\u0026amp;deg\n\u003cbr\u003ethat better distributes the ever increasing valve spring loads over the retainer than typical 7\u0026amp;deg\n\u003cbr\u003elocks. Precision-machined out of super-tough, fatigue-resistant Metal alloy, Super Locks fit any COMP Cams 10\u0026amp;deg\n\u003cbr\u003eretainer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0 IN\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885946597739,"sku":"CCA-625-1","price":23.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-625-1-1.jpg?v=1770607182"},{"product_id":"engine-valves-parts-cca626-1","title":"10 Degree, 3\/8in, 4 Groove Lock \u003cbr\u003e for Chrysler","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Chrysler four groove Steel Super Lock features a 10\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size. It is recommended for all Race Applications because Super Locks have a wider angle 10\u0026amp;deg\n\u003cbr\u003ethat better distributes the ever increasing valve spring loads over the retainer than typical 7\u0026amp;deg\n\u003cbr\u003elocks. Precision-machined out of super-tough, fatigue-resistant Metal alloy, Super Locks fit any COMP Cams 10\u0026amp;deg\n\u003cbr\u003eretainer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0 IN\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885946630507,"sku":"CCA-626-1","price":23.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-626-1-1.jpg?v=1770607188"},{"product_id":"engine-valves-parts-cca619-1","title":"Lash Cap \u003cbr\u003e for 426 HEMI 5\/16in Valve Stem, 0.19in Head Height","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 1 Hardened Lash Cap for 426 Hemi's: 5\/16 Stem Size, .190\" Head Height, .080\" Thickness. These Valve Lash Caps for 426 HEMI Applications have a .190\" overall head height and .080\" thickness. Because today's racing engines run at higher RPM levels with harsh Cam profiles, the tip of the valve stem is subjected to a tremendous amount of pounding. These engines always run just on the brink of valve float - one of the most Severe conditions that can exist. The best solution to this problem is the COMP Cams Valve Lash Caps. These lash caps are precision machined and ground perfectly flat to maintain accuracy of valve train adjustment. A must have for titanium valves, these Lash Caps fit valve stems well and are easily removed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eOverall Head Height: 0.19 IN\n\u003c\/li\u003e\u003cli\u003eThickness: 0.08 IN\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 5\/16 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Lash Cap\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885946696043,"sku":"CCA-619-1","price":23.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-619-1-1.jpg?v=1770607080"},{"product_id":"engine-valves-parts-cca620-1","title":"Hardened Lash Cap \u003cbr\u003e 5\/16in Valve Stem, 0.23in Head Height","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 1 Hardened Lash Cap: 5\/16 Stem Size, .230\" Head Height, .080\" Thickness. These Hardened Valve Lash Caps have a .230\" overall head height and .080\" thickness. Because today's racing engines run at higher RPM levels with harsh Cam profiles, the tip of the valve stem is subjected to a tremendous amount of pounding. These engines always run just on the brink of valve float - one of the most Severe conditions that can exist. The best solution to this problem is the COMP Cams Valve Lash Caps. These lash caps are precision machined and ground perfectly flat to maintain accuracy of valve train adjustment. A must have for titanium valves, these Lash Caps fit valve stems well and are easily removed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eOverall Head Height: 0.23 IN\n\u003c\/li\u003e\u003cli\u003eThickness: 0.08 IN\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 5\/16 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Lash Cap\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885947318635,"sku":"CCA-620-1","price":23.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-620-1-1.jpg?v=1770607089"},{"product_id":"engine-valves-parts-cca621-1","title":"Hardened Lash Cap \u003cbr\u003e 11\/32in Valve Stem, 0.21in Head Height","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 1 Hardened Lash Cap: 11\/32 Stem Size, .210\" Head Height, .080\" Thickness. These Hardened Valve Lash Caps have a .210\" overall head height and .080\" thickness. Because today's racing engines run at higher RPM levels with harsh Cam profiles, the tip of the valve stem is subjected to a tremendous amount of pounding. These engines always run just on the brink of valve float - one of the most Severe conditions that can exist. The best solution to this problem is the COMP Cams Valve Lash Caps. These lash caps are precision machined and ground perfectly flat to maintain accuracy of valve train adjustment. A must have for titanium valves, these Lash Caps fit valve stems well and are easily removed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eOverall Head Height: 0.21 IN\n\u003c\/li\u003e\u003cli\u003eThickness: 0.08 IN\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Lash Cap\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885947351403,"sku":"CCA-621-1","price":23.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-621-1-1.jpg?v=1770607132"},{"product_id":"engine-valves-parts-cca622-1","title":"Hardened Lash Cap \u003cbr\u003e 3\/8in Valve Stem, 0.19in Head Height","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 1 Hardened Lash Cap: 5\/16 Stem Size, .190\" Head Height, .080\" Thickness. These Hardened Valve Lash Caps have a .190\" overall head height and .080\" thickness. Because today's racing engines run at higher RPM levels with harsh Cam profiles, the tip of the valve stem is subjected to a tremendous amount of pounding. These engines always run just on the brink of valve float - one of the most Severe conditions that can exist. The best solution to this problem is the COMP Cams Valve Lash Caps. These lash caps are precision machined and ground perfectly flat to maintain accuracy of valve train adjustment. A must have for titanium valves, these Lash Caps fit valve stems well and are easily removed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eOverall Head Height: 0.19 IN\n\u003c\/li\u003e\u003cli\u003eThickness: 0.08 IN\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Lash Cap\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885953184107,"sku":"CCA-622-1","price":24.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-622-1-1.jpg?v=1770607141"},{"product_id":"engine-valves-parts-cca614-4","title":"Single Groove Locks Set of 4 \u003cbr\u003e 10 Degree 11\/32, + 0.050 Height","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eCOMP Cams Super valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of \"pull-through\" failure. They are precision-machined for accuracy and are available for many popular valve sizes with or without a lash cap recess. Super valve locks will fit any COMP Cams 10 degree retainer and are recommended for all Race Applications due to their superior strength._x000D_\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885955576171,"sku":"CCA-614-4","price":27.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-614-4-1.jpg?v=1770607042"},{"product_id":"engine-valves-parts-cca616-4","title":"Single Groove Locks Set of 4 \u003cbr\u003e 10 Degree 3\/8in, + 0.050in Height","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003e3\/8 Super Lock-1\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885956231531,"sku":"CCA-616-4","price":27.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-616-4-1.jpg?v=1770607060"},{"product_id":"engine-valves-parts-cca612-4","title":"Single Groove Locks Set of 4 \u003cbr\u003e 10 Degree, 3\/8in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003e3\/8 Super Lock\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885956264299,"sku":"CCA-612-4","price":27.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-612-4-1.jpg?v=1770607022"},{"product_id":"engine-valves-parts-cca617-4","title":"Single Groove Locks Set of 16 \u003cbr\u003e 10 Degree, .310in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIdeal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885956297067,"sku":"CCA-617-4","price":27.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-617-4-1.jpg?v=1770607068"},{"product_id":"engine-valves-parts-cca618-4","title":"Set of 4 Single Groove Locks w\/ Lash Cap Recess \u003cbr\u003e 10 Degree, .310in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003e5\/16 Super Lock with Recess\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885956329835,"sku":"CCA-618-4","price":27.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-618-4-1.jpg?v=1770607078"},{"product_id":"engine-valves-parts-cca601-8","title":"8pcs Hardened Steel Single Groove Street Locks \u003cbr\u003e 7 Degree, 11\/32in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 8 Pairs of hardened Steel Street Locks: 1 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 11\/32\" Stem Size. This hardened Steel, single groove Steel Street Lock with 7\u0026amp;deg\n\u003cbr\u003elock angle and 11\/32\" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885956624747,"sku":"CCA-601-8","price":27.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-601-8-1.jpg?v=1770606781"},{"product_id":"engine-valves-parts-cca601-12","title":"12pcs Hardened Steel Single Groove Street Locks \u003cbr\u003e 7 Degree, 11\/32in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 12 Pairs of hardened Steel Street Locks: 1 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 11\/32\" Stem Size. This hardened Steel, single groove Steel Street Lock with 7\u0026amp;deg\n\u003cbr\u003elock angle and 11\/32\" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885963997547,"sku":"CCA-601-12","price":32.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-601-12-1.jpg?v=1770606777"},{"product_id":"engine-valves-parts-cca600-12","title":"12PCS Hardened Steel Single Groove Street Locks \u003cbr\u003e 7 Degree, 5\/16in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eHardened Steel 7\u0026amp;deg\n\u003cbr\u003e5\/16\", Single Groove Street Lock - Set of 12\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eValve Stem Diameter: 5\/16 IN\n\u003c\/li\u003e\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885965963627,"sku":"CCA-600-12","price":32.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-600-12-1.jpg?v=1770606738"},{"product_id":"engine-valves-parts-cca604-12","title":"Hardened Steel 4 Groove Street Locks Set of 12 \u003cbr\u003e for Chrysler","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 12 Pairs of Chrysler hardened Steel Street Locks: 4 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 3\/8\" Stem SizeThese hardened Steel, Chrysler 4 groove Steel Street Locks with 7\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size are a perfect replacement lock for stock engine rebuilds. They are recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: 4\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885965996395,"sku":"CCA-604-12","price":32.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-604-12-1.jpg?v=1770606841"},{"product_id":"engine-valves-parts-cca602-12","title":"Hardened Steel 2 Groove Street Locks Set of 12 \u003cbr\u003e for Chrysler","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eHardened Steel 7\u0026amp;deg\n\u003cbr\u003e3\/8\", 2 Groove Street Lock for Chrysler - Set of 12\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: 2\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885966160235,"sku":"CCA-602-12","price":32.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-602-12-1.jpg?v=1770606809"},{"product_id":"engine-valves-parts-cca605-12","title":"12PCS Hardened Steel 4 Groove Street Locks \u003cbr\u003e Ford 351C","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eHardened Steel 7\u0026amp;deg\n\u003cbr\u003e11\/32\", 4 Groove Street Lock for Ford 351C - Set of 12\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: 4\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885967896939,"sku":"CCA-605-12","price":32.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-605-12-1.jpg?v=1770606866"},{"product_id":"engine-valves-parts-cca603-12","title":"Hardened Steel Single Groove Street Locks \u003cbr\u003e 7 Degree, 3\/8in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 12 Pairs of hardened Steel Street Locks: 1 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 3\/8\" Stem Size. This hardened Steel, single groove Steel Street Lock with 7\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885969240427,"sku":"CCA-603-12","price":32.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-603-12-1.jpg?v=1770606830"},{"product_id":"engine-valves-parts-cca614-8","title":"Set of 8 Single Groove Locks \u003cbr\u003e 10 Degree 11\/32, +.050in Height","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003e10\u0026amp;deg\n\u003cbr\u003e11\/32\", Single Groove Lock with o Lash Cap Recess, +.050\" Height - Set of 8\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0.05 IN\n\u003c\/li\u003e\u003cli\u003eLash Cap Recess: No\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885980184939,"sku":"CCA-614-8","price":37.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-614-8-1.jpg?v=1770607045"},{"product_id":"engine-valves-parts-cca611-8","title":"Set of 8 Single Groove Locks w\/ Lash Cap Recess \u003cbr\u003e 10 Degree, 11\/32in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThese Steel Super Locks featuring a lash cap recess, 10\u0026amp;deg\n\u003cbr\u003elock angle and 11\/32\" valve stem size are recommended for all Race Applications.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: 0 IN\n\u003c\/li\u003e\u003cli\u003eLash Cap Recess: Yes\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885988639083,"sku":"CCA-611-8","price":37.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-611-8-1.jpg?v=1770607011"},{"product_id":"engine-valves-parts-cca638-1","title":"Titanium Single Groove Lock w\/ Lash Cap Recess \u003cbr\u003e 10 Degree, 11\/32in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Titanium Super Lock with lash cap recess features a 10\u0026amp;deg\n\u003cbr\u003elock angle and 11\/32\" valve stem size. It is recommended for all Race Applications because Titanium Super Locks have a wider angle 10\u0026amp;deg\n\u003cbr\u003ethat better distributes the ever increasing valve spring loads over the retainer than typical 7\u0026amp;deg\n\u003cbr\u003elocks. Precision-machined out of super-tough, fatigue-resistant Metal alloy, Titanium Super Locks are the ultimate in accuracy and fit any COMP Cams 10\u0026amp;deg\n\u003cbr\u003eretainer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLash Cap Recess: Yes\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Titanium\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885994537323,"sku":"CCA-638-1","price":41.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-638-1-1.jpg?v=1770607258"},{"product_id":"engine-valves-parts-cca600-16","title":"Single Groove Street Locks Set of 16 \u003cbr\u003e 7 Degree, 5\/16in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 16 Pairs of hardened Steel Street Locks: 1 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 5\/16\" Stem Size. This hardened Steel, single groove Steel Street Lock with 7\u0026amp;deg\n\u003cbr\u003elock angle and 5\/16\" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 5\/16 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885994733931,"sku":"CCA-600-16","price":38.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-600-16-1.jpg?v=1770606740"},{"product_id":"engine-valves-parts-cca606-16","title":"Hardened Steel 2\/4 Groove Street Locks Set of 16 \u003cbr\u003e 7 Degree, 3\/8in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 16 Pairs total of Chrysler hardened Steel Street Locks: 2 and 4 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 3\/8\" Stem SizeThese hardened Steel, Chrysler Steel Street Locks with 7\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size are a perfect replacement lock for stock engine rebuilds. They are recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: 2 and 4\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885994766699,"sku":"CCA-606-16","price":38.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-606-16-1.jpg?v=1770606886"},{"product_id":"engine-valves-parts-cca602-16","title":"Hardened Steel 2 Groove Street Locks Set of 16 \u003cbr\u003e 7 Degree, 3\/8in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 16 Pairs of Chrysler hardened Steel Street Locks: 2 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 3\/8\" Stem SizeThese hardened Steel, Chrysler 2 groove Steel Street Locks with 7\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size are a perfect replacement lock for stock engine rebuilds. They are recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: 2\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885994996075,"sku":"CCA-602-16","price":38.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-602-16-1.jpg?v=1770606811"},{"product_id":"engine-valves-parts-cca636-1","title":"Titanium Single Groove Race Lock \u003cbr\u003e 8 Degree, 11\/32in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eTitanium Super 7 Valve Locks with 8\u0026amp;deg\n\u003cbr\u003elock angle and 11\/32\" valve stem size require specific retainers and do not work with standard 7\u0026amp;deg\n\u003cbr\u003eor 10\u0026amp;deg\n\u003cbr\u003eretainers. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eAdjusted Installed Height: No IN\n\u003c\/li\u003e\u003cli\u003eLock Angle: 8 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super 7\n\u003c\/li\u003e\u003cli\u003eMaterial: Titanium\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 11\/32 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885996142955,"sku":"CCA-636-1","price":41.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-636-1-1.jpg?v=1770607245"},{"product_id":"engine-valves-parts-cca603-16","title":"Steel Single Groove Street Locks Set of 16 \u003cbr\u003e 7 Degree, 3\/8in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eIncludes 16 Pairs of hardened Steel Street Locks: 1 Groove, 7\u0026amp;deg\n\u003cbr\u003eAngle, 3\/8\" Stem Size. This hardened Steel, single groove Steel Street Lock with 7\u0026amp;deg\n\u003cbr\u003elock angle and 3\/8\" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street Applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the OD of the stem, the locks are too small. Most people believe that the tang inside a valve lock Oldsmobile the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a \"collet\" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the \"collet\" effect to keep the retainer and lock in place.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLock Angle: 7 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Street Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Steel\n\u003c\/li\u003e\u003cli\u003eNumber of Grooves: Single\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 3\/8 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper Kit\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885997814123,"sku":"CCA-603-16","price":38.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-603-16-1.jpg?v=1770606832"},{"product_id":"engine-valves-parts-cca637-1","title":"Titanium Single Groove Lock w\/ Lash Cap Recess \u003cbr\u003e 10 Degree, 5\/16in","description":"\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eThis Titanium Super Lock with lash cap recess features a 10\u0026amp;deg\n\u003cbr\u003elock angle and 5\/16\" valve stem size. It is recommended for all Race Applications because Titanium Super Locks have a wider angle 10\u0026amp;deg\n\u003cbr\u003ethat better distributes the ever increasing valve spring loads over the retainer than typical 7\u0026amp;deg\n\u003cbr\u003elocks. Precision-machined out of super-tough, fatigue-resistant Metal alloy, Titanium Super Locks are the ultimate in accuracy and fit any COMP Cams 10\u0026amp;deg\n\u003cbr\u003eretainer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eLash Cap Recess: Yes\n\u003c\/li\u003e\u003cli\u003eLock Angle: 10 DD\n\u003c\/li\u003e\u003cli\u003eLock Series: Super Locks\n\u003c\/li\u003e\u003cli\u003eMaterial: Titanium\n\u003c\/li\u003e\u003cli\u003eValve Stem Diameter: 5\/16 IN\u003c\/li\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eEngine Valve Spring Retainer Keeper\u003c\/li\u003e","brand":"Comp Cams","offers":[{"title":"Default Title","offer_id":52885997846891,"sku":"CCA-637-1","price":41.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/files\/CCA-637-1-1.jpg?v=1770607249"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1961\/1987\/collections\/UltraSSValves-2_552db7ed-85b9-4471-814f-9e0747129094.jpg?v=1770342131","url":"https:\/\/caautoparts.com\/collections\/comp-cams-engine-valves-parts.oembed","provider":"CA Auto Parts","version":"1.0","type":"link"}